Hazard warning light

Started by MilesH, January 22, 2018, 19:45

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

MilesH

January 22, 2018, 19:45 Last Edit: January 1, 1970, 01:00 by Guest
One of the pins has come out of my hazard warning light switch, with the wire still attached.

Does anyone have the dash off at the moment or the hazard warning light plug accessible and can take a picture of the rear of the plug so I can see which of the holes the wire and pin goes into?

Thanks

Treboeth

#1
January 22, 2018, 22:44 Last Edit: January 1, 1970, 01:00 by Guest
Bit of a long shot this one.


You could always ask Dick or Dean if they have a spare one they could send a pic of if you get stuck.

hamspeed

#2
January 23, 2018, 07:31 Last Edit: January 1, 1970, 01:00 by Guest
Miles I'll post something up when it's light, mines just hanging loose on my race car.
02' Toyota MR2 Roadster Race Car -
Owner @ GarageFiftyNine - Supplier of Automotive parts and accessories | Stainless Steel Manifolds | LED/DRL Fo

MilesH

#3
January 23, 2018, 18:11 Last Edit: January 1, 1970, 01:00 by Guest
Quote from: "hamspeed"Miles I'll post something up when it's light, mines just hanging loose on my race car.

Great, thanks Hamish!

hamspeed

#4
January 24, 2018, 14:06 Last Edit: January 1, 1970, 01:00 by Guest


Pin 1 - Blank
Pin 2 - Green/Silver Tracer (2)
Pin 3 - White/Black/Silver Tracer (2)
Pin 4 - Blank
Pin 5 - White/Black
Pin 6 - Blank
Pin 7 - Blank
Pin 8 - Blank
Pin 9 - White
Pin 10 - Blank

Hope this helps Miles.
02' Toyota MR2 Roadster Race Car -
Owner @ GarageFiftyNine - Supplier of Automotive parts and accessories | Stainless Steel Manifolds | LED/DRL Fo
Print
Go Up Pages1
User actions
Tags: