Wheels (Post pics of your wheels here)

[swandez]

Few of mine with 16" leggeras...

Which leggeras are those? Could look it up but I'm lazy

What front lip is this?

[inside]

What front lip is this?

Just a cheap ebay stick-on rubber lip... Seems to be quite popular lip choice here  s:D s:D

[Jacobsprky]

[attachment=0:ufz9fo5m] ia0 mixed 2016 pictures 142 (Large).jpg ia0 [/attachment:ufz9fo5m]

stock 15s pfl striped back to bare then sprayed with hammerite hammered black, Painted center caps gloss black.

[inside]

New wheels, this time 15" superleggeras with kumho ku36. Very lightweight, ~13kg per complete wheel and (5.35kg per alloy wheel):

[ilovejapcrap]

BBS wheels from E30 325i
14x6.5 4x100 185/60/14 Front, 205/60/14 Rear
ET 30
More pics soon.

And stock wheels painted graphite. 205/50/15 Front, 225/50/15 Rear


The BBS wheels have become my daily wheels, the stock ones are getting wrapped in grippy tires either new street tires or lightly used r-comps, for time trials and track days.

Can you still put soft top up with that cage out of interest

[yoann]

I've just bought and fitted the latest Lotus Elise Club Racer 12-spoke alloys.

17" Rears with TOYO T1-R 215/40/17
16" Fronts with TOYO T1-R 195/45/16

Feels great and look even better since the TEIN springs were fitted.

Congrats your car is absolutely beautifull  s:) s:) ))
love these elements, where have you bought them please ?
i would do the same for my MR  s;) s;)  : gb kit front/lateral/rear and lotus wheels

[Mrcypher]

Rota slipstreams in bronze
16x7 et40

[FuZZy_gr]

Kosei penta 17' and 205/45/17 tyres

[Bulbsubaru]

[attachment=0:1k2jhrdj] ia0 mr2 photo.jpg ia0 [/attachment:1k2jhrdj]

Lenso RS5 7j 17" 205-40-17 all around et42

[Bulbsubaru]

[attachment=0:34smkzo3] ia0 mr2 photo.jpg ia0 [/attachment:34smkzo3]

Lenso RS5 7j 17" 205-40-17 all around et42

[Bullit]

How do people run 17's ? my car had them on when i bought and first it went for alignment, Then i replaced all the bushes all trying to chase the reason behind my awful tram lining ?

[SuperArt]

Ive not contributed anything to the forum in a while and I know how folks love photos so here goes.

TTE Grandprix 16x7 et45
205/45r16 front
225/40r16 rear

[SuperArt]

[StuC]

Can't help feel the front has too much camber and the rear offset needs some attention Art!

[SuperArt]

Don't worry I promise it will look ok once I put my super wide flared arches on 😎

[StuC]

Don't worry I promise it will look ok once I put my super wide flared arches on 😎

Great to hear you have a plan!!! Lol.
Will you change your name to Carlos Fandango then?

[SuperArt]

I had to look that one up 😂
I don't think my car has as much six appeal as the anglia to warrant the change in moniker. 😎

[StuC]

I had to look that one up 😂
I don't think my car has as much six appeal as the anglia to warrant the change in moniker. 😎

So it's not a hard no then!!

[McMr2]

SSR Type C
16x7 et30

195/45 front
215/45 rear

[Ben.03.6speed]

Seeing if this works: freshly painted in byker...

[Ben.03.6speed]

stock repainted grey with Toyo T1R

[ad_car_08]

What wheel nuts do you folks have for your aftermarket wheels, and where do you get them from? I've got a set of Japan Racing alloy wheels, but the standard nuts are too wide...in respect to the girth of the chamferred part. Consequently, I can't use my wheels

[ad_car_08]

...Or was it because of a captive washer, I can't remember now

[McMr2]

What wheel nuts do you folks have for your aftermarket wheels, and where do you get them from? I've got a set of Japan Racing alloy wheels, but the standard nuts are too wide...in respect to the girth of the chamferred part. Consequently, I can't use my wheels

I had a set to use so can't give any recommendations on where to buy but iirc the standard wheels use nuts with a flat shoulder whereas aftermarket wheels often need a tapered shoulder type nut to give a secure fit. Also worth checking if you need spigot rings unless your wheels are the correct bore.

[ad_car_08]

What wheel nuts do you folks have for your aftermarket wheels, and where do you get them from? I've got a set of Japan Racing alloy wheels, but the standard nuts are too wide...in respect to the girth of the chamferred part. Consequently, I can't use my wheels

I had a set to use so can't give any recommendations on where to buy but iirc the standard wheels use nuts with a flat shoulder whereas aftermarket wheels often need a tapered shoulder type nut to give a secure fit. Also worth checking if you need spigot rings unless your wheels are the correct bore.

Ahhh yes, sorry, that's the correct way round  :withstupid: I need tapered, and the standard nuts are flat with a wide captive washer.
I do have spigot rings, which Miles kindly gave me when he sold me the JP Racing alloys