A little " How To " I've developed to help reduce our creaky MR2 dash's... especially in cold weather until the cabin warms up
1 Get some 6mm bore 9mm wall black foam pipe insulation for micro bore A/C pipes etc (cost me £ 1.38 for 2 metres)
(http://i679.photobucket.com/albums/vv160/whatdoyousuggest/DSCF1862.jpg) (http://s679.photobucket.com/user/whatdoyousuggest/media/DSCF1862.jpg.html)
2 Cut about 1.2 metres and ease it out of sight between dash and windscreen ( it's hidden by dash on the inside and black band at the bottom of the screen on the outside )
(http://i679.photobucket.com/albums/vv160/whatdoyousuggest/DSCF1863.jpg) (http://s679.photobucket.com/user/whatdoyousuggest/media/DSCF1863.jpg.html)
3 finally with the spine of a suitably narrow hardback ( I used "Porsche The Legend" !!!) push it way down and what little is visible ( if any ) looks fine because it's black
(http://i679.photobucket.com/albums/vv160/whatdoyousuggest/DSCF1864.jpg) (http://s679.photobucket.com/user/whatdoyousuggest/media/DSCF1864.jpg.html)
Mods might want to move this to the relevant section if they think it might be of use... It's always worked for me so hope it helps others
Mike s:) :) s:)