MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: MilesH on January 22, 2018, 19:45

Title: Hazard warning light
Post by: MilesH on January 22, 2018, 19:45
One of the pins has come out of my hazard warning light switch, with the wire still attached.

Does anyone have the dash off at the moment or the hazard warning light plug accessible and can take a picture of the rear of the plug so I can see which of the holes the wire and pin goes into?

Thanks
Title: Re: Hazard warning light
Post by: Treboeth on January 22, 2018, 22:44
Bit of a long shot this one.


You could always ask Dick or Dean if they have a spare one they could send a pic of if you get stuck.
Title: Re: Hazard warning light
Post by: hamspeed on January 23, 2018, 07:31
Miles I'll post something up when it's light, mines just hanging loose on my race car.
Title: Re: Hazard warning light
Post by: MilesH on January 23, 2018, 18:11
Quote from: "hamspeed"Miles I'll post something up when it's light, mines just hanging loose on my race car.

Great, thanks Hamish!
Title: Re: Hazard warning light
Post by: hamspeed on January 24, 2018, 14:06
(https://s5.postimg.org/52ht01eqv/DSCF8214.jpg)

Pin 1 - Blank
Pin 2 - Green/Silver Tracer (2)
Pin 3 - White/Black/Silver Tracer (2)
Pin 4 - Blank
Pin 5 - White/Black
Pin 6 - Blank
Pin 7 - Blank
Pin 8 - Blank
Pin 9 - White
Pin 10 - Blank

Hope this helps Miles.