14inch rims on my mk3!

Started by Oddshoes, September 4, 2016, 13:15

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Oddshoes

September 4, 2016, 13:15 Last Edit: January 1, 1970, 01:00 by Guest
has it been done and if so what sort of width and offset need too be looked at

Many thanks

Dave
2001 Turbocharged MR-S in Gulf Racing Colours... with goodies from Cusco, Damd, Top Secret, Monkey Wrench Racing, TRD, Lenso and running 264bhp@ 10psi... TBC

MR2 Owner since 2006.

Jrichards20

#1
September 4, 2016, 13:30 Last Edit: January 1, 1970, 01:00 by Guest
Can I ask why? I would wonder what wheels are actually made in 14" with a big enough width?

Edit: RPF1s come in 7J so they would do. What are the plans for the car? With a body kit/lowered an awful lot, I think 14" would look slightly out of place
[strike]2005 Black - MR2 Roadster[/strike]
[strike]2004 Sable MR2 Roadster TURBO[/strike]
[strike]2000 Red - MR2 Roadster[/strike]
[strike]Lotus Elise S2 - Silver[/strike]
[strike]2000 Blue - MR2 V6 Roadster[/strike]
Street Triple 765 RS

secla

#2
September 4, 2016, 15:58 Last Edit: January 1, 1970, 01:00 by Guest
Brakes may be a tight squeeze under 14s aswell

MilesH

#3
September 4, 2016, 18:32 Last Edit: January 1, 1970, 01:00 by Guest
Dave, yes you can and I did to save weight on track and they worked well. I ran 6.5J and ET35 - they weren't MR2 specific but I bought some spigot rings and they were fine. I think they were from an mx 5 as they have the same 4x100 pattern but the centre bore is larger.

Hope that helps
Print
Go Up Pages1
User actions
Tags: