Quote from: Carolyn on April 29, 2024, 15:51Try a smear of Dirko GreyI like the sound of that... will try not to go over board.
Quote from: Call the midlife! on April 29, 2024, 15:11Is the pipe a good, snug fit? If it's ever so slightly oversized the clamp might be nipping it away from the drain and making a crease for oil to get out.Same size as the other end which isn't leaking.. I'm thinking of dropping the oil and adding a ridge onto the drain pipe. But that'll happen after the mapping I think.
Quote from: jvanzyl on April 29, 2024, 13:23Lunchtime update.Is the pipe a good, snug fit? If it's ever so slightly oversized the clamp might be nipping it away from the drain and making a crease for oil to get out.
Fitted additional better clamps, tidied up the hose pipes underneath so they're nicely tucked to and out of the way.
Continued trying to bleed the system.. still only getting heat under consistent revving.. no more air bubbles coming out after about 20 mins of running... might need another jolly up and down the hill.
Still getting a drippy leak from the oil drain on the turbo.. going to possibly have to live with it or remake the drain attachment with some kind of barb..
Quote from: Alex Knight on April 28, 2024, 18:28You could order another plug from a breaker, then de-pin the existing plug and fit the new one.