Aerial wire

Started by no1trancefan, June 14, 2013, 19:57

0 Members and 1 Guest are viewing this topic.

no1trancefan

Having bought a new harness i forgot to check the aerial wire before throwing out the old one

I have a jan 05 mr2 red.

I see conflicting colours for the aerial wire they seem to change between years or even less, i have seen an 05 red edition with a purple wire, and also an 05 red edition with a blue/white wire although there were two and he cut the wrong one so bought a new harness after found right one.

Is there anyway i can check it with a DMM before start snipping

Anonymous

#1
They are normally powered off the remote wire with an aftermarket install

no1trancefan

#2
I need to run it to a switch but the wire you cut on the standard harness differs between years my remote wire from hu doesn't directly link up the aerial power

no1trancefan

#3
Had two amps wired to remote wire and had missed the plug off harness that controlled the aerial plugged it into each end aerial straight up what a tit

Tags: