Print Page - 02 Sensor - Bank 1/Sensor 1 location?

Title: 02 Sensor - Bank 1/Sensor 1 location?
Post by: Anonymous on January 26, 2007, 16:00

Hello folks,

Got the usual 02 sensor warning light...

I've been through a few past posts and I'm happy at getting a generic 4-wire sensor from Gendan Direct (which incidentally are down to £29.95 now). But I've just got one quick question left: MrT read the code as bank 1 sensor 1, which is that - i.e. when looking at the manifold/cat?

And I guess any other burning tips on this job anyone wants to share would be good!

Thanks in advance,
Mat.

Title:
Post by: kanujunkie on January 26, 2007, 16:05

its the RHs of the precat

Title:
Post by: Liz on January 26, 2007, 16:07

Can you post to link to them at that price please

Title:
Post by: kanujunkie on January 26, 2007, 16:11

m http://www.gendan.co.uk/product_O24WIRE.html (http://www.gendan.co.uk/product_O24WIRE.html) m

Title:
Post by: Anonymous on January 30, 2007, 16:03

Thanks Stu.

Title:
Post by: Hugo on February 2, 2007, 21:03

I am just going to buy 2 of these and do both at the same time, hopfully they will be ok s:wink: :wink: s:wink:
m http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=015 (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=250049440839&ssPageName=STRK:MEWA:IT&ih=015) m

Title:
Post by: Anonymous on March 25, 2007, 18:55

If anyone is wondering about these generic sensors I can say that this type do work, engine warning light is off - been in my car for a few days and no problems.

(And a dam site cheaper than the £200 Mr T was quoting!)

MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: Anonymous on January 26, 2007, 16:00