Project Green Hornet

Cabrioman · July 3, 2017, 19:02

New MK3 was delivered today. s:bounce: :bounce: s:bounce:

Had a look around and bodywork isn't too bad (apart from horrid stickers on the back) with a couple of marks. but look like they can be polished out.
Interior is good and roof needs it's ears removed s:shock: :shock: s:shock:
First job is to see if i can get it started.
I'm unsure about the battery (300A) but going to charge it anyway. I need new battery terminals as they're missing and i have the aerial to fit.
Depending on the outcome of trying to start it depends on a full engine rebuild or just a service. What ever happens, i will be sorting out the pre-cats.

delhusband · July 3, 2017, 20:20

Congrats, looks great s:)

s:)

jonbill · July 3, 2017, 21:07

Looks great. Fun ahead.

Cabrioman · July 6, 2017, 16:42

Larger battery fitted,
Immob' light goes out and then turn the key
Most of the time you hear a clunk from the starter motor and that's it or on the very rare occasion it'll turn slowly.
Any Ideas?

jonbill · July 6, 2017, 22:08

Seized engine? Take the plugs out, squirt some oil in and try to turn the engine over on the crank sprocket bolt with a socket and breaker bar.

jonbill · July 6, 2017, 22:09

Or maybe bad earth from the battery strap?

Essex2Visuvesi · July 6, 2017, 22:44

Check the alternator
Mine sat over the winter and the alternator seized making it impossible to turn over

Cabrioman · July 7, 2017, 07:28

Cheers for the reply's.
I'm going to get a new battery as I don't think the one it is that good. Then I'll check the earth as it will try to turn over on the odd occasion. If not, I'll stick with the original plan and take the engine out. That way if there is an issue with the alternator etc... I'll be able to fix it while being rebuilt.

Cabrioman · July 10, 2017, 18:20

Got the engine started s:)

s:)
Sounds like a dog though.
https://www.facebook.com/Cabrioman/videos/10213989901726729/
Seems to be squeaking from the pulleys but i'm guessing knocking is the bottom end failing?
Any other thoughts?

Cabrioman · July 14, 2017, 16:40

Work has begun s:D

s:D

Looking a bit rusty under there s:shock: :shock: s:shock:

But new parts have arrived s8)

s8)

manos3003 · July 14, 2017, 18:52

Most of those rusty parts can be replaced anyway. Or powdercoated, depending on preference.

Cabrioman · July 16, 2017, 08:43

Quote from: "manos3003"Most of those rusty parts can be replaced anyway. Or powdercoated, depending on preference.

Thinking of doing the arms green s8)

s8)

The Arch Bishop · July 16, 2017, 10:45

Love this colour and looks like it'll be a great project car. Subframe actually doesn't look too bad from the pictures which is a bonus!

Cabrioman · April 2, 2018, 18:51

Engine is now complete and moved back to the garage. I've refitted the fly wheel and exhaust manifold. I've started to prepare the engine bay and I'm struggling to remove the security torque screws from the ECU so I can remove the wiring loom.

Sent from my TA-1033 using Tapatalk

StuC · April 2, 2018, 20:15

These are becoming super rare now.

It's been ages since I have seen one.

1979scotte · April 2, 2018, 20:17

Quote from: StuC on April 2, 2018, 20:15
These are becoming super rare now.

It's been ages since I have seen one.

You say that like its a bad thing

StuC · April 2, 2018, 20:21

There is a room enough for everyone one, even the silvers.

Cabrioman · April 2, 2018, 20:27

Quote from: StuC on April 2, 2018, 20:15
These are becoming super rare now.

It's been ages since I have seen one.

There's one up the road from me. It's perfect as I walk past it almost every day so gives me motivation to complete mine.

Sent from my TA-1033 using Tapatalk

Cabrioman · April 4, 2018, 19:48

What oil do people use?
I have the choice of 10W 40 or 5W 30.

Sent from my TA-1033 using Tapatalk

Cabrioman · April 4, 2018, 19:52

I'm also guessing I need a 1700mm drive belt with air con.

Sent from my TA-1033 using Tapatalk

StuC · April 4, 2018, 20:12

Quote from: Cabrioman on April 4, 2018, 19:48
What oil do people use?
I have the choice of 10W 40 or 5W 30

5w 30 will see you right.

tomaky · April 4, 2018, 21:48

Good to see your getting there bud

Cabrioman · April 5, 2018, 06:56

Quote from: tomaky on April 4, 2018, 21:48
Good to see your getting there bud

Cheers

I'm hoping to get her started by next week but that depends on time.

Sent from my TA-1033 using Tapatalk

Cabrioman · April 5, 2018, 15:55

Engine bay stone chipped and prepped ready. Wiring loom removed and begun connecting to engine. Exhaust manifold fitted apart from 2 bolts which were too far gone.
Hoping to install this weekend and start by next weekend.

Sent from my TA-1033 using Tapatalk

Cabrioman · April 7, 2018, 17:12

Clutch on.
Gearbox on.
Wiring connected.
Engine mount brackets fitted.
Engine in engine bay.

Going back up tomorrow to fit engine bad connect pipes.

Sent from my TA-1033 using Tapatalk