Started by Micktet999, February 28, 2022, 16:38
0 Members and 1 Guest are viewing this topic.
Quote from: Micktet999 on February 28, 2022, 22:52Hi 1979scotte Not sure yet on engine management. Still researching that one. Seen one called "Unichip" on Internet. Open to suggestions. Thanks Mick
Quote from: Alex Knight on March 1, 2022, 08:52Power. Reliability. Money.Pick two, you can't have all three.You can turbo these cars on the cheap, just don't expect it to last.
Quote from: shnazzle on March 1, 2022, 08:54Having said that, going up to about 185-190hp (crank) can be perfectly reliable. TTE turbo is at that and passes the Toyota reliability tests. SP240 even run for years.
Quote from: Alex Knight on March 1, 2022, 09:58I'm not talking about the capacity of the 1ZZ, I'm talking about doing it with cheap parts.
Quote from: Micktet999 on March 1, 2022, 08:35Thanks guys. My understanding is that it has has to be a piggy back one as a stand alone wont work the dash board stuff? This is only based on some American sites info so could be bullsh@t for all I know. My local tuner (RS in Leeds) cannot supply one for this car. TBH as I'm on a budget it will probably come down to price.
Quote from: Micktet999 on March 1, 2022, 22:34Thanks everyone for the comments. I will give RDT in Doncaster a bell they are not far away.On a handling note. Has anyone tried a Whiteline 18mm rear arb? My standard puny one is very corroded and probably weakened so I was thinking of replacing it with the above.
Quote from: Micktet999 on February 28, 2022, 16:38. Will add fotos but it says the files are too large. Any ideas how to get them on. Cheers
Quote from: Micktet999 on March 2, 2022, 09:10Thanks Shnazzle might take you up on that. I know absolutely nothing about the electrickery side of things. I was brought up with minis and escorts!! Yes just trial fitted intake will be extended. Thinking of putting maf/map sensor on intake side. More photos to follow. )-;