addtionnal gauge cover

Jap GT300 · December 16, 2005, 20:34

I bought the Varis version in Fibre Glass for £250.

Those din guage slots can be bought for as little as £10

Tem · December 16, 2005, 23:11

Quote from: "Jap GT300"I bought the Varis version in Fibre Glass for £250.

Is that still available? s:shock: :shock: s:shock:

I thought it was discontinued, cause it's not on japanparts.com anymore. They only had this one:
m http://www.japanparts.com/db/partslist. ... 2&small=10 m

Jap GT300 · December 19, 2005, 22:28

I got it from our varis distributor supastylin.com

so.simple · December 20, 2005, 00:00

Tem, are you talking about this?

If so, they still have it, only it is listed under "Interior - Others".

Item: 016-002-010 (Carbon)
Item: 016-002-011 (FRP)

Aren't they just too expensive?

Tem · December 20, 2005, 05:37

Quote from: "so.simple"Tem, are you talking about this?

If so, they still have it, only it is listed under "Interior - Others".

Item: 016-002-010 (Carbon)
Item: 016-002-011 (FRP)

Aren't they just too expensive?

Ah, thanks s:oops: :oops: s:oops:

The one from TRD is even more expensive...

spit · December 22, 2005, 21:31

Can someone tell me how to remove the stock bin cover? It looks like it should be straight-forward but I can't work it out! s:oops: :oops: s:oops:

kanujunkie · December 22, 2005, 21:35

just pull it towards the front of the car, its just on push clips

Tem · December 22, 2005, 21:53

Quote from: "kanujunkie"just pull it towards the front of the car, its just on push clips

Uh...I wouldn't do that s:? :? s:?

The hinges are removable, so pull them out first. Use a screwdriver or alike to torque them off. After that the cover will come off.

kanujunkie · December 22, 2005, 22:21

Quote from: "Tem"
Quote from: "kanujunkie"just pull it towards the front of the car, its just on push clips

Uh...I wouldn't do that s:? :? s:?

The hinges are removable, so pull them out first. Use a screwdriver or alike to torque them off. After that the cover will come off.

pulled off fine on mine, the hinges are made of ABS plastic, in a C shape that goes on a round piece of bar, breaking them wont happen easily, its in my hands ATM and has been on and off loads

spit · December 22, 2005, 23:41

Done it - thanks guys.

It was as you described, Tem. Nothing shifted until I eased the hinge pins out. Looking more closely, there is a slot in each of the pin mounts, presumably for the purpose of getting a screwdriver in to lift them.