The question I have is this - As most of the studs that hold it in place have sheared and it is mostly held in place with plastic ties - Would it be detrimental to remove it altogether?
Hi mine was like that, if i can remember most of the brackets do unbolt, all i did was carefully drill out and re-tap them to 6mm.
About 40 mins work , fitted m6 pan head studs and coppeslip for good measure.
Quote from: "krazysteve"Hi mine was like that, if i can remember most of the brackets do unbolt, all i did was carefully drill out and re-tap them to 6mm.
About 40 mins work , fitted m6 pan head studs and coppeslip for good measure.
Nice tip!
Mine are all knackered too! I was just thinking about this issue today!