Quote from: Alex Knight on Today at 18:28You could order another plug from a breaker, then de-pin the existing plug and fit the new one.
Quote from: Joesson on April 25, 2024, 14:56@jvanzyl
That O-ring has been mentioned in dispatches as being wrong size and / or poor quality.
Here are links to @Bossworld thread
https://www.mr2roc.org/index.php?msg=756001
And my own earlier thread
https://www.mr2roc.org/index.php?msg=726718
A recurring theme and another, as yet, unresolved issue .
Quote from: Call the midlife! on April 25, 2024, 16:54I know you're going to pull those pipes through more to take up all the slack and then cable tie them to the existing pipework. Aren't you?😃Yes yes... 😁
Quote from: inigopete on Today at 06:30As an aside, what are those jacks / lifts? I need to upgrade from my old, small, trolley jack.
Quote from: WillM on March 28, 2024, 15:31Hi is that brace available still anywhere? Id like one.
Quote from: Gaz mr-s on April 25, 2024, 21:35Depending on where you read, the required thread length is 1 - 1.5 the diameter of the thread. If you have 13mm exposed, that won't be taking into account the thread in the taper. ??