Members with OBD II Code Readers

Started by carl_evs, April 12, 2007, 20:08

0 Members and 1 Guest are viewing this topic.

Dans555

#25
You can add me to the list now.....
2003 MR2 Roadster SMT - Silver & Red Leather.
Hardtop & A/C.
Twin Exhaust
New Brigestone Potenza\'s all around!
New O2 sensor (Thanks Nathan!)
Trico Aero wipers (cheers Les for the recommendation!)

Anonymous

#26
I have one! OBDII Scanner - Craig in Wallingford - Oxfordshire

jjr197

#27
Mee too.
OBD II in Southampton.

Jimi
"If you're driving with the top up, the storm outside had better have a name!"

psvpilot59

#28
You can add me if you like.  I got one a few weeks ago and it works fine.  Pointed me to the post cat Lambda sensor, which BTW is a b..t..rd to wire up if you get a sensor with a 6 inch lead!  I'm in Wibsey - Twixt Bradford & Halifax, West Yorkshire.

drbailey

#29
You can add me for J Spec cars.....  Dave B

m312

#30
You can add me for Leicester now

Anonymous

#31
You can add me for Shrewsbury, oxon , Grantham and Birmingham. I get around abit!

chalced

#32
Just got mine...It shows codes,clear codes and can do live measurements too    s8) 8) s8)  

Anyone who needs a check then I am in Coventry!!

Mel.

Anonymous

#33
got reader today Hartlepool

Anonymous

#34
I am LAUNCH Ceader V expert from China.
Anyone like to share that more please add me

uktotty

#35
Quote from: "tommyta"I am LAUNCH Ceader V expert from China.
Anyone like to share that more please add me
OMG!!!

SO have you got the secret to reading JSpec cars?

SimonC_Here

#36
add him to what though? that is the question.

Anonymous

#37
It's spam and needs to be deleted.

/obvious

SimonC_Here

#38
Quote from: "Dan M"It's spam and needs to be deleted.

/obvious

Not yet it isn't. His IP is from China and there is no link in his profile and he hasn't said anything other than offering help.

OK so benefit of the doubt but I'll keep and eye on it.

philster_d

#39
Who is adding the names to the members with ODB map? "Membership Map" at the top right of the forum.

Phil

Anonymous

#40
Quote from: "SimonC_Here"Not yet it isn't. His IP is from China and there is no link in his profile and he hasn't said anything other than offering help.

OK so benefit of the doubt but I'll keep and eye on it.
If you care to have a quick google, you'll find that TommyTa quickly leads to Autobink which leads to the Creader V which apparently is a code reader. The user may be a genuine sign up, but it's cheap advertising for a code reader from China that in no way guarantees to be able to read from JDM cars. Maybe not direct spam, but if nothing else it's a commercial advert and should be treated as such.

Ah thank you  s8) 8) s8)


/Sherlock_Holmes_mode

SimonC_Here

#41
I was waiting for the TaDa actually!  s:) :) s:)   s:lol: :lol: s:lol:

Peter Wright

#42
I sent him a PM at least he was good enough to reply although a little vague
Peter Wright wrote:
Subject: Members with OBD II Code Readers

Can you confirm that you can get the Launch Creader JP that can read JDM vehicles

There is no JP Creader V in LAUNCH original.
As I know only three language EN,Spainish and French.
I saw that picture post on the board.But be careful,LAUNCH has never that stuff.You can see on x431.com
Thanks
Pete.  1999 MRs.  Power Enterpise Turbo, Greddy Ultimate, Davids style bars,  Walnut Dash Kit,  2003 side pods, Chrome Mirrors & Windscreen Surround, TRD Spoiler, H&S quad exhaust, Corkeys Breast Plate, TRD Member braces, Fox Racing lightweight 17" racing alloys.

philster_d

#43
this is ot but I bit and looked that stuff up.

There seems to be a uk site for it  m http://www.launchtech.co.uk/creader.html m

So I think its possible the point is it likely some kind of copy and not the original product, from the named supplier.

Anonymous

#44
Quote from: "philster_d"this is ot but I bit and looked that stuff up.

There seems to be a uk site for it  m http://www.launchtech.co.uk/creader.html m

So I think its possible the point is it likely some kind of copy and not the original product, from the named supplier.

It's true that LAUNCH has no that JP stuff.
As Launch has a sub-OEM factory.Some guys with those over produced accessories to made SO-CALLED JP Creader V.
LAUNCH official site has never shown that JP Creader V stuff.They are COPY units.The original Creader V has a stick with serial number to register at x431.com
But all copys have no that stick.
Kind remind only
Tommy

philster_d

#45
thanks for the info Tommy.

Anonymous

#46
I'm glad you understood it  s;) ;) s;)

So basically it can't read JDM codes, and is just a commercial advert to a product which really needs to be removed as per club rules.

Wabbitkilla

#47
I have one of those readers and it doesn't work on imports.
Nice reader though, you can get live read outs of sensor output.
Cute & fluffy animals were definitely hurt during the production of this post, there're plenty more where they came from
Aztec Bronze S2 Elise 111S
Campovolo Grey Abarth 595 Competizione

Anonymous

#48
Quote from: "Wabbitkilla"I have one of those readers and it doesn't work on imports.
Nice reader though, you can get live read outs of sensor output.

If you are in EU countries,I suggest you use Creader V in Spain and EN or French.
Anyway,that has three language options for your choice.
Tommy

Wabbitkilla

#49
No, I have no problem with the language ... the reader doesn't work with MR-S imported from Japan.
European market cars are ok as they are true OBDii compliant.

I got it to try really as i wanted one to read JDM cars codes.
It doesn't work on them, but I like the reader anyway because it's small, light, got a good display, and reads out live sensor readings nicely.
No batteries either.
Cute & fluffy animals were definitely hurt during the production of this post, there're plenty more where they came from
Aztec Bronze S2 Elise 111S
Campovolo Grey Abarth 595 Competizione

Tags: