Started by MrT, July 7, 2023, 13:50
0 Members and 1 Guest are viewing this topic.
Quote from: Carolyn on July 16, 2023, 09:54As I recall, I cheated. I spliced off the main power going into the ignition switch, put a fuse in the line then to an illuminating switch and straight to the rear fog (which is led). So it isn't linked to the lights being on, but (as it's an import) the MOT man lets it go.
Quote from: Carolyn on July 16, 2023, 10:18Try a new independent ground.
Quote from: Carolyn on July 16, 2023, 11:41I used the power into the ignition switch so, not switched. LEDs are very voltage sensitive, so a slightly dodgy ground can cause a fault that wouldn't show up on an incandescent tail-light.I like to make sure the voltage is spot-on for LEDs.