Stopping aerial going up and down

[robsonic]

Yes, I know this topic has been covered before - that's why I printed out some of the previous threads and thought I'd do that today on my day off - seems a quick mod. 6 soaking hours later its finally done!

I guess the wiring colours change depending on what make make of stereo/car you have.So for my standard toyota stereo on an 03 plate the wire i wanted wasn't orange or blue, but after cutting 9 out of a possible ten wires found that it was black! So here is my completely un technical guide.

Remove the stereo. (I took my car to my local garage and they removed it for free)
Looking at the stereo from the top, with the on/off/volume button on the left, at the back there are 2 rows of connectors.
One big one on the top row. Ignore It.
On the bottom row there is -
a small one the left. Ignore It.
another small one and a slighter bigger one next to each other in the middle. Ignore the smaller one.
The slightly bigger one has two rows of wires in it. My black one was roughly in the middle of the bottom row.
The rest is the same as the other threads.

Success  s:bounce: :bounce: s:bounce: