Speaker Wiring

Started by Anonymous, February 9, 2013, 10:30

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Anonymous

February 9, 2013, 10:30 Last Edit: January 1, 1970, 01:00 by Guest
How on earth do you get the speaker wire through the door grommets!?!?!?!?

nathanMR2

#1
February 9, 2013, 10:37 Last Edit: January 1, 1970, 01:00 by Guest
With all the will in the world  s:lol: :lol: s:lol:

Wire coat hanger, tape and washing up liquid should do it. You can also pop the grommet out of its mounting which makes it a tad easier.
MR2 Roadster TTE Turbo - now sold and 2less but forever an enthusiast

Anonymous

#2
February 9, 2013, 10:47 Last Edit: January 1, 1970, 01:00 by Guest
Its a bloody nightmare!

stargazer30

#3
February 9, 2013, 12:51 Last Edit: January 1, 1970, 01:00 by Guest
I didn't I tapped the stock wires at the back of the HU and ran the thick stuff from that point to the amp in the rear bin.  RCAs and Speakers one side, power the other.
2003 Silver MR2 - Very Very Standard + Leccy Renault Zoe aka the battery mobile.
Ex Blue 04 MR2 - TTE Turbo\'d ~185bhp/200lbs/ft, Sports Clutch, Breast Plate, Lowered & half decent audio
Ex Silver 05 MR2 -  SP turbo conversion 227bhp, 205lbs/ft, with  cobra dual exit exhaust.

ais

#4
February 9, 2013, 13:23 Last Edit: January 1, 1970, 01:00 by Guest
ditto. did same here - alot easier

Anonymous

#5
February 9, 2013, 13:38 Last Edit: January 1, 1970, 01:00 by Guest
All done now...

It was hard... but it will be worth it  s:) :) s:)  quite pleased with myself.


Thanks to jimr2 for the phone support  s:) :) s:)

Pics to come soon  s:) :) s:)
Print
Go Up Pages1
User actions
Tags: