Recent posts

#31
Quote from: jvanzyl on May 10, 2024, 11:00RRR have bumped session to next weekend  :-\ so I've rebooked trailer for that.

Took it down to local garage to get alignment done- they came back to say everything was way out. Front inner and out tie rods completely rusted and unable to adjust, and apparently one cross threaded bolt on the rear trailing arms... so grand total for replacing all is coming to £500...  :'(
Was not anticipating this...
Joe has another set of rear arms for sale £175 or so, might be worth a look.
#32
Reader's Rides / Re: '01 Silver - The daily com...
Last post by Carolyn - May 10, 2024, 11:11
Spray outer joints with plus gas.  Wire brush exposed threads.  Spray again.  Heat up till very hot with plumber's torch.  Crack loose.
#33
Reader's Rides / Re: '01 Silver - The daily com...
Last post by jvanzyl - May 10, 2024, 11:00
RRR have bumped session to next weekend  :-\ so I've rebooked trailer for that.

Took it down to local garage to get alignment done- they came back to say everything was way out. Front inner and out tie rods completely rusted and unable to adjust, and apparently one cross threaded bolt on the rear trailing arms... so grand total for replacing all is coming to £500...  :'(
Was not anticipating this...
#34
Performance Related / Re: emanage support tool
Last post by tets - May 10, 2024, 05:06
Quote from: Call the midlife! on May  9, 2024, 21:04I'm sure you know but if you go RR fuel regulator you'll need to modify the fuel rail and blank off the OEM regulator in the pump, plus fit the return fuel line.
None of that is a two minute job so be ready 🤓

I have a return and external fuel pump / filter already fitted hence the fairly quick solution. I have a RR regulator but no idea of its origins (probably cheap eBay) so would need a new one.
I suppose I could revisit the emanage at a later date but don't like being defeated!
#35
Performance Related / Re: emanage support tool
Last post by Call the midlife! - May 9, 2024, 21:04
I'm sure you know but if you go RR fuel regulator you'll need to modify the fuel rail and blank off the OEM regulator in the pump, plus fit the return fuel line.
None of that is a two minute job so be ready 🤓
#36
Performance Related / Re: emanage support tool
Last post by tets - May 9, 2024, 19:28
Quote from: shnazzle on May  9, 2024, 19:26I had it running on my Linux laptop using Wine so it's not too bad really

Unfortunately I don't have a Linux laptop but I do have loads of wine  ;D

I'll get there Patrick, just a bit short of time!
#37
Performance Related / Re: emanage support tool
Last post by tets - May 9, 2024, 19:27
Quote from: fawtytoo on May  9, 2024, 19:24For Greddy. I've PM'd you.

replied thanks
#38
Performance Related / Re: emanage support tool
Last post by shnazzle - May 9, 2024, 19:26
I had it running on my Linux laptop using Wine so it's not too bad really
#39
Performance Related / Re: emanage support tool
Last post by fawtytoo - May 9, 2024, 19:24
Quote from: tets on May  9, 2024, 19:18Virtualbox, win 98 or Greddy?
For Greddy. I've PM'd you.
#40
Performance Related / Re: emanage support tool
Last post by tets - May 9, 2024, 19:18
Quote from: fawtytoo on May  9, 2024, 19:08Where did you get the software? Is it something I can get my hands on easily?

Disregard: I found it.

Version 2.3 works on Windows 7 32 bit.

Virtualbox, win 98 or Greddy?