Injectors

[cabbydave]

Damm I just pais £55 for one inc p&p

[Mark A]

These turned up today, the adapters look wrong but might be both male and female connectors in one.

[CrazySX]

These turned up today, the adapters look wrong but might be both male and female connectors in one.

How much were they? are they 630cc?

The adapter will be: Black Plugs into Injector, Grey acts as plug (Toyota Injector) for Injector plugs in bay.

[Mark A]

Yep I was being thick thinking the grey adapter fitted into the Denso injectors, but it fits the loom so the connectors are all OK.

Yes Siemens Deka 630cc injectors priced at £169 with delivery and the P&P adapters.

[keljon]

could you confirm which adaptors you have?
is it these ones?
 m http://fuelperformance.co.uk/index.php? ... ct_id=5101 m

[Mark A]

That's them, I sent him a picture of the green Mr2 injector and he did the rest, give him a ring and just ask for the same as a Mark's MR2 turbo

[thetyrant]

Thread resurrection but hopefully your still on here, ive been trying to get some adaptors like these from fuel performance but the ones they sent are different on the loom side for a different type of Denso fitting, they are now telling me they cant supply the one for our cars which is annoying!, I can make them by soldering plugs onto loom but was hoping not to have to do that, just wondered if yours worked out ok ?

Thanks
Ian

[Gaz2405]

I got some loom adaptors that where slightly wrong. I 'asjusted' them with a dremel. I'll see if I can dig out the order from ebay.

[thetyrant]

I got some loom adaptors that where slightly wrong. I 'asjusted' them with a dremel. I'll see if I can dig out the order from ebay.

That would be appreciated thanks bud , probably same as ones I got sent and I would of had a look at modifying  myself but they said to return so I stupidly presumed this meant they had the correct ones, got back from dropping them off at post office today to find a message saying they haven't anything suitable!

 P1ssed off to say the least as even if I couldn't of modified them to plug in to loom I could of cut the bosch connectors off and soldered them on, I was very disappointed as I checked with them before buying explaining which car and which injectors I had etc and they said they were correct ones, today he says he has never seen a MR2 with these type of connectors! so I told them all 1zz and 2zz equipped cars use this type and they are meant to be specialists but clearly guy I dealt with had no clue and takes forever to reply hence posting them back before I got a reply, not impressed as you can probably tell

[Gaz2405]

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F111997713721

These are what I used, had to trim the part that fits onto the loom.

Injector side was fine.

And these were the injectors.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F111762356213

[thetyrant]

Thanks for that i never thought of using a non-denso fitting on harness side, will get measuring up, still not heard back from FP about possible solutions as even if they send me the bosch fitting on pigtails i can then splice them in, although  getting them to send same as yours is the key was there a lot of modding to get fit loom ? and do they fit nice and tight ?

Ive found a place in Australia that might do a perfect pnp just waiting to hear back

[thetyrant]

Finally found somewhere that does the correct connector to plug into our injector loom and will give them a call on monday check availability, here is the link for others reference wanting to make injector adaptors for 1zz/2zz motors   - https://www.warwickts.com/4476/Denso-Toyota-2Way-Injector-Male-Automotive-Connector-Kit