Martin's 2001 PFL Roadster

[MartinC]

Thank you.

ps: Are they safe ?

I'm obviously not going to provide you with any guarantees, but I've not had any problems in the 3 months I've had them in.

[TheTigerUK]

Here you go.  This is for a pack of 10, which is the correct number for a manual car.  I think you may need a couple more bulbs if you have got an SMT.

https://www.amazon.co.uk/gp/product/B00V6C685M/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

Fitted today, thank you, I was really surprised how small the bulbs are.

[MartinC]

Fitted today, thank you, I was really surprised how small the bulbs are.

Yes, they are tiny.  I bet you can't wait until it's dark to see the difference.    I know I couldn't.

[TheTigerUK]

Yes, they are tiny.  I bet you can't wait until it's dark to see the difference.    I know I couldn't.

It looks good, thanks

[Jared]

Hi guys, just re-using this old thread about dash bulbs as 2 of mine went out so its a good time to replace them all.
So these bulbs above look fine but...
They are in a black plastic holder that twists out of the back of the clocks so would it be best to buy the bulbs already in those little back holders.
Also the other bulb that's gone is behind the heater controls and I'm not sure if the bulb comes away from the connecter as that one looks different so do you pull the bulb out with a tool and risk them braking them or am I missing something.     

[Gaz mr-s]

They are in a black plastic holder that twists out of the back of the clocks so would it be best to buy the bulbs already in those little back holders.   

The holders undo by a half turn or less....simple.
This gives you options, & feel more robust when inserting. Easier to extract too.
https://www.ebay.co.uk/itm/305596183169?_skw=305596183169&itmmeta=01JCR302T3SSP9TGCFX3Z7FDVZ&hash=item4726f3b281%3Ag%3AWpQAAOSwM5lfK6qq&itmprp=enc%3AAQAJAAAA8HoV3kP08IDx%2BKZ9MfhVJKnSZaZlt0XGnOHa%2FHbjgD1ddABochgmhdzfA3CBVO2WA3WqxhjmzFHtIXTSKr0PpjrvDgtadyzVndIc9mqFvclnafcGglfEYgwZ4FFEswM9lePC8FK1V%2FXTq%2B7Zyj8XjHmnlfsUK2X4NuOX4ZFAoks0vyZD0LsNkGfwdyVNFTMbWCJNMgMGdbXm7NLRlNiL2aNdo1GRROgM6EO4lL5w6poHZCMxxzDwlvft5BCoS9feM3aJJcvmjGn6rBaDQN92wpf4U5TBpQtrk0KDgG9zr29C5YVmbcIBXKA57I4%2BD2cDwg%3D%3D%7Ctkp%3ABk9SR4ytgIPmZA&var=604512886442

[Jared]

The holders undo by a half turn or less....simple.
This gives you options, & feel more robust when inserting. Easier to extract too.
https://www.ebay.co.uk/itm/305596183169?_skw=305596183169&itmmeta=01JCR302T3SSP9TGCFX3Z7FDVZ&hash=item4726f3b281%3Ag%3AWpQAAOSwM5lfK6qq&itmprp=enc%3AAQAJAAAA8HoV3kP08IDx%2BKZ9MfhVJKnSZaZlt0XGnOHa%2FHbjgD1ddABochgmhdzfA3CBVO2WA3WqxhjmzFHtIXTSKr0PpjrvDgtadyzVndIc9mqFvclnafcGglfEYgwZ4FFEswM9lePC8FK1V%2FXTq%2B7Zyj8XjHmnlfsUK2X4NuOX4ZFAoks0vyZD0LsNkGfwdyVNFTMbWCJNMgMGdbXm7NLRlNiL2aNdo1GRROgM6EO4lL5w6poHZCMxxzDwlvft5BCoS9feM3aJJcvmjGn6rBaDQN92wpf4U5TBpQtrk0KDgG9zr29C5YVmbcIBXKA57I4%2BD2cDwg%3D%3D%7Ctkp%3ABk9SR4ytgIPmZA&var=604512886442

I'm not that bothered about LED or just a bit brighter (2.3w) than before, just how can you pull the bulb safely out of the black plastic holder. Do you just grab them with a grips and pull them out and hope they don't snap as I can get a good grip with my fingers. 

[Steffi]

That's a better!!