Text only | Text with Images

MR2 Roadster Owners Club

The Workshop => General => Topic started by: Jap GT300 on July 5, 2003, 20:46

Title: Oil Cooler
Post by: Jap GT300 on July 5, 2003, 20:46
QuoteI am looking for an oil cooler... Apparently the Spyders in the UK come with
a oil cooler that instead of working off air flow through a grill, it uses
the coolant with a heat exchanger

I have been emailed this.  As I have always had Jspec 2's I dont know the answer.  I'm sure its not correct but could someone clarify.

Thanks Adam
Title:
Post by: markiii on July 6, 2003, 00:38
Perfectly correct according to teh BGB we have an oil cooler which sandwiches between the sump and the filter. very similar to teh one that they were fabbing on SC, just runs off the main coolant system.

Mark.
Title:
Post by: Jap GT300 on July 6, 2003, 11:49
Strange, I was never aware of this.  Is there any possibility you know the part numbers so that a kit can be made up?

Thanks Adam
Title:
Post by: markiii on July 6, 2003, 16:00
I'm not sure if the part numbers are in there but I'll take  a look.
Text only | Text with Images