Text only | Text with Images

MR2 Roadster Owners Club

The Workshop => General => Topic started by: ShieldsOnTour on July 23, 2013, 09:12

Title: "Glueing" body parts
Post by: ShieldsOnTour on July 23, 2013, 09:12
Hi all,

I've just picked up TTE bumper inserts from OddShoes & they seem to need to be glued in. What is best to use? I've been using some clear sealant (bathroom style) for a lot of stuff - would this be OK or is there something "proper" that I should be using? Hoping to re-paint and fit this weekend - will post pic's up when done.

Thanks all.

Tim.
Title: Re: "Glueing" body parts
Post by: simers on July 23, 2013, 09:50
Don't use bathroom sealer as that will cause fishes eyes aka a reaction... Use tiger seal I find is the best as it can be painted over.. To leave no lines etc use panel wipe on a rag to remove all the excess.. Leaves a nice clean finish
Title: Re: "Glueing" body parts
Post by: ShieldsOnTour on July 23, 2013, 09:53
Nice one - Tiger Seal bought  s:) :) s:)
Title: Re: "Glueing" body parts
Post by: simers on July 23, 2013, 11:01
Quote from: "ShieldsOnTour"Nice one - Tiger Seal bought  s:) :) s:)
No hassle tim... I use it a lot... It's great stuff...
Title: Re: "Glueing" body parts
Post by: StuC on July 23, 2013, 12:06
+1 on the tiger seal.
I used it when I transplanted an Audi TT bumper onto my Seat Toledo... SOLID!!
Title: Re: "Glueing" body parts
Post by: nathanMR2 on July 23, 2013, 12:11
Yep wont be coming off again once its been Tiger Sealed
Title: Re: "Glueing" body parts
Post by: simers on July 23, 2013, 12:44
I used it to fit the full s-line kit on my Audi... Never coming off unless I break it
Text only | Text with Images