Hi, new to the forum ! Just picked up a 2000 mr2 completely standard with hard top
Failed mot on a few minor items that will be easily fixed and then it will be my dedicated track car
I've had a few fwd track cars in the past this will be my first red
Immediate plans are to go over everything and make sure it's in general good health. Give it a service and get through the mot. Only mods for the moment will be coilovers and decent tyres then il get it out on track and see how it feels
New to the mr2 so hoping this forum will be a good source of info
Cracking cars on track
I've used mine for competitions
My build is further down if you want to look. My car is up for sale but if not I'll be breaking it so a chance for you maybe to get some parts
Any coilovers available ? s:) :) s:)
So I have been speaking to a friend who takes part in time attack and he's persuaded me to take part next year
Ordered a few parts up this week. Meister r coilovers, braided lines new discs and yellowstuff pads along with new rear calipers.
The wife has set me a budget which I must (try to) stick to, it's not a budget build by any means but I don't want to be spending on unnecessary items.
Il be starting by getting the chassis set up how I want and then look at adding some power later in the year when I have some track time under my belt
Should be a fun year
Last weekend i fitted my new meister r crd coilovers, new rear discs, yellowstuff pads , HEL braided lines and new rear calipers.
Just ordered eibach rear camber bolts, front discs and yellowatuff pads and rear droplinks, that should be everything i need to get it motd !
hopefully it will all arrive by the end of the week so i can get it all fitted ready for its mot
Do you need the camber bolts with the coilovers?
Not enough adjustment in them for your setup?
Quote from: "secla"The wife has set me a budget which I must (try to) stick to,
So will she demand receipts or does she trust you enough when you tell her you had to spend a whole £200 on coilovers? s:lol: :lol: s:lol: s:lol: :lol: s:lol:
Couching that with the proviso that you managed to get fitting thrown in at the price, of course.
Quote from: "1979scotte"Do you need the camber bolts with the coilovers?
Not enough adjustment in them for your setup?
The coilovers are only camber adjustable at the front
Quote from: "cptspaulding"So will she demand receipts or does she trust you enough when you tell her you had to spend a whole £200 on coilovers? s:lol: :lol: s:lol: s:lol: :lol: s:lol:
Couching that with the proviso that you managed to get fitting thrown in at the price, of course.
No she stupidly trusts me s:) :) s:)
It's a decent budget though so hopefully there's won't be an over spend
I'm also taking a trips to Wales on Saturday to collect a rear half cage, hard top and ultra racing rear anti roll bar.
I already have a 6 point harness from a previous car, just need to decide on a bucket seat now
Be good to see you Sean! About time you came this way s;) ;) s;)
Completely forgot I started this thread so a bit of a lack of updates.
A quick catch up, all suspension and brakes have now been fitted and the cars rolling again. I purchased a sparco bucket seat in the end with rogue Motorsport side mounts.
So moving onto the wheels tyres etc. I ordered some 15x8 et0 for the rear and 15x7 et20 for the front, these will be fitted with 225/195 r888 and will obviously give it a considerably wider track, I contacted rogue who sell a set of arch flares. Collected a few weeks back but there designed to fit with the trd body kit so that was another purchase !
Did a test fit today
(http://uploads.tapatalk-cdn.com/20160418/8fb972f5e2e156ebd87c88478388bdba.jpg)
I'm sure not to everyone's taste but Im liking it
Also fitted a Carbon bonnet and purchased a celica to steel the 2zz from s:) :) s:)
YES! s8) 8) s8)
I didn't realise they sold the arch flares as well, do you mind me asking how much?
I think they were around 220 ! But like I said there made to fit with the trd kit, I found some of the kit used but you can buy replicas for around 500.
loving the stance, and wheels s:) :) s:)
cheers tommy
Front wheels fitted today, didn't consider the dish may cause clearance issue
(http://uploads.tapatalk-cdn.com/20160423/7e4481b840594c593894af534c9d6a4e.jpg)
They still turn but a bit close for comfort so il get a 3mm spacer on there
Looking good so far there buddy! I'll be keeping an eye on this build as it's caught my interest s:) :) s:) I don't think you'll be letting the back end loose with that wheel and tyre combo in a hurry lol
Cheers
I'm hoping to get the car setup and on track next month. Hopefully the wider track was worth the time and money as I was questioning whether it was money well spent
Small job done today, rear lip fitted
(http://uploads.tapatalk-cdn.com/20160425/6022d82e4469fbc56cd21ea30f4307e5.jpg)
Looks good that! Iim sure it'll look better with the wide arch kit on.
How comes you're selling the 2zzge? Change of route, is it?
yup tbh i could do with the money to finish other bits of the car off, ive gone a bit over budget in some areas spending money i wasnt expecting to and id be looking at spending a bit more getting the 2zz in the way i want to. So i`l probably stick with the 1zz until next year some time
Whilst fitting the side skirts at the weekend i decided to remove what was left of the nappy !
Unfortunately what i thought was a solid rear subframe seems to have a big rust hole underneath s:( :( s:( So i`l be heading down to toyota with and handing over a chunk of cash for a new one before long, probably get it powder coated and waxoiled if i can find somewhere local that powdercoats for a decent price.
Its so common.
Really dont think enough people look at them hard enough.
Sooner rather than later supposedly no longer manufactured and stock is short.
Yup with the nappy on it all looked reasonably solid
(http://uploads.tapatalk-cdn.com/20160504/ff35f7bc412e6b45e5577aade2fcd969.jpg)
Last bit of bodykit arrived today
Went for the more expensive (assuming better quality) aerokit
Ok so j havnt updated this for a while (I work pretty slowly [PENSIVE FACE])
Created this today
(http://uploads.tapatalk-cdn.com/20160926/7c76d7b707210c9f209a6ee005b42275.jpg)
Extra loom for the lift control on the 2zz.
Think I'm going to do the whole loom like this at some point as its a lot cleaner than the horrible plastic and tape covering.
The 1zz is out and gone, just waiting on a couple of bits from mwr then I can drop the 2zz in ! Then onto building an exhaust [WEARY FACE]
Just went back through the thread to see where I had got to so I could do a proper update
Purchased a second hand subframe that had been painted and wax oiled, all solid.
Added to this with hardrace rear toe arms and new cambolts as they had seizure in the old frame
Purchased brand new handbrake cables from Toyota. Expensive but that's pretty much the entire brake setup replaced. Handbrake cables were a pig to fit but all done and dusted now
The kits all fitted. The more expensive body kit doesnt fit well. Not a big deal for me but if I was to buy again I'd just buy the cheapest tbh. Still need to fit the arches. Trying to work out a way I can make them bolt on as they cross over the bumper joins and I would have to cut the archs to make the bumpers removable
I've switched most of the bits needed onto the 2zz now. It's pretty much ready to drop in
I'm going to do a full custom exhaust. I don't like the idea of the other available options. Ppe is to expensive and the other options are a compromise on flow for an easier fit in my opinion !
I'm going for something vx220 style with a dual exit coming out where the number plate should be. Which may mean taking a chunk out of the rear crash bar
Been getting a few things done on the car recently
I've been stripping suspension down to polybush + new balljoint and track rod ends, already have a set of hardrace rear track arms so along with the meister coil overs everything is good on the suspension front ! Im going to pop a 1zz in to try and get a trackday in before christmas
So after making some headway ive ground to a halt once again.
This week was meant to be quite productive as the kids are away for the week, unfortunately on sunday i pulled a muscle in my back so rolling around under cars is a bit of a no no, So ive spent a bit of time ordering more parts s:) :) s:)
polybushs for the rear, whiteline front anti roll bar with new droplinks and a new steering wheel and boss should arrive soon