Text only | Text with Images

MR2 Roadster Owners Club

The Workshop => Audio / Security / Electrical => Topic started by: custardavenger on April 20, 2008, 12:35

Title: Dash removal
Post by: custardavenger on April 20, 2008, 12:35
Anyone know how to remove the air vents in the middle of the dash?

Edited
See below
Title:
Post by: kanujunkie on April 20, 2008, 12:52
start by removeing the dash, HVAC panel and everything else, the vents sit in a Y shaped tube that sits on everything else, so unfortunatley they need to come out to get at it
Title:
Post by: custardavenger on April 20, 2008, 12:53
Are you saying remove the whole dash or just the heater panel part?
Title:
Post by: kanujunkie on April 20, 2008, 12:58
whole dash
Title:
Post by: custardavenger on April 20, 2008, 13:01
Oooh. Hmm. Sound's like a whole lot of work. Cheers stu
Title:
Post by: kanujunkie on April 20, 2008, 15:29
pretty sure it is, i was going to put some guages in there at one point until i came to the same conclusion
Title:
Post by: custardavenger on April 20, 2008, 15:30
Yeah that was my plan. Gonna investigate it a bit.
Title:
Post by: kanujunkie on April 20, 2008, 15:32
if whatever you had in mind could just sit in the ducts the that would open up options
Title:
Post by: custardavenger on April 20, 2008, 16:12
Yeah gonna replace the vent part with a chunk of Alu. A/F and some LED's and the display form a PFC comander in the other
Title:
Post by: custardavenger on April 21, 2008, 22:37
Ok so question for anyone who has removed their dash.

What is the minimum you need to remove/undo?

Can you get away with not removing the steering wheel?
Text only | Text with Images