Print Page - Torque settings

Title: Torque settings
Post by: Mike_V on August 20, 2011, 10:29

Can anyone advise of the torque settings for the 4 bolts that attach the rear subframe to the chassis?
Many thanks.

Sent from my iPhone using Tapatalk

Title: Re: Torque settings
Post by: spit on August 20, 2011, 13:07

80NM (59 ft lbs) for the four bolts holding the rear suspension member to the chassis rails.

(not to be confused with the rear crash beam which are a piddling 20NM)

Title: Re: Torque settings
Post by: Mike_V on August 20, 2011, 14:39

Thanks Spit. Much appreciated :-) :-) :-)

MR2 Roadster Owners Club

The Workshop => General => Topic started by: Mike_V on August 20, 2011, 10:29