Print Page - TRD radiator cap

Title: TRD radiator cap
Post by: Anonymous on April 19, 2004, 12:27

Hi,

Any MRS-er using this TRD radiator cap?

m http://www.toyota-trd.com/en/strt/e_radicap.html (http://www.toyota-trd.com/en/strt/e_radicap.html) m

Which one should I buy, S type or N type? I don't understand what the statement means:

"Not installed on the MR2 Spyder (ZZW30) and Celica (ZZT23#)."

Thanks.

Kevin

Title:
Post by: Tem on April 19, 2004, 12:29

I don't think those fit...

Title:
Post by: Anonymous on April 19, 2004, 12:30

I think Adam (Jap GT300) had some in stock a while back for the roadster... send him a PM.

Title: Re: TRD radiator cap
Post by: Chris on April 20, 2004, 00:36

Quote from: "chhokevin"Hi,

Any MRS-er using this TRD radiator cap?

m http://www.toyota-trd.com/en/strt/e_radicap.html (http://www.toyota-trd.com/en/strt/e_radicap.html) m

Which one should I buy, S type or N type? I don't understand what the statement means:

"Not installed on the MR2 Spyder (ZZW30) and Celica (ZZT23#)."

Thanks.

Kevin

This one was brought in from the States...
I'd say that what they are trying to say that this cap was not installed and will not install on the mr2. The trd cap for the 2 is different, just a round replacement for the plastic jobbie: http://www.btinternet.com/~chris.roy/mods/trd-oilcap.jpg

Title:
Post by: Anonymous on April 20, 2004, 00:51

I don't think I'd want to buy that TRD one Chris: they can't even spell 'Filler' right on the packaging! s:shock: :shock: s:shock: s:lol: :lol: s:lol:

Title:
Post by: Jap GT300 on April 20, 2004, 07:02

The question was about the MR-S Radiator cap not the Oil Cap!

I did do a bulk order on these and still have them all sitting at home. They do not fit any spec of the MR2!

They don't make it clear enough do they.

Adam

Title:
Post by: Tem on April 20, 2004, 07:09

Quote from: "Jap GT300"They do not fit any spec of the MR2!

They do with Mk1...possibly Mk2 as well. You can probably get rid of them through some generic MR2-site (or eBay).

Title:
Post by: Chris on April 21, 2004, 12:38

Quote from: "Jap GT300"The question was about the MR-S Radiator cap not the Oil Cap!

DOH!!!! s:oops: :oops: s:oops: s:oops: :oops: s:oops: That will teach me to post late at night when I'm knackered and not paying attention properly! s:roll: :roll: s:roll: s:wink: :wink: s:wink:

Quote from: "ekona"I don't think I'd want to buy that TRD one Chris: they can't even spell 'Filler' right on the packaging!

Well, that's the japs for ya... s:roll: :roll: s:roll:

Title:
Post by: LeeUK on April 21, 2004, 22:57

There is a spelling error on the writing on the cone of my apexi air filter too! I think it says "Dual Fannel Air Filter!" Hmmm s:roll: :roll: s:roll:

Title:
Post by: Jap GT300 on April 22, 2004, 13:48

Quote from: "Tem"
Quote from: "Jap GT300"They do not fit any spec of the MR2!

They do with Mk1...possibly Mk2 as well. You can probably get rid of them through some generic MR2-site (or eBay).

I have tried a mark 2 but that didn't work. I haven't tried a mark 1 yet.

Tem, if you send me your address I'll post one out for you in return for some feedback s:wink: :wink: s:wink:

Title:
Post by: Tem on April 22, 2004, 18:41

Quote from: "Jap GT300"Tem, if you send me your address I'll post one out for you in return for some feedback s:wink: :wink: s:wink:

I've sold my Mk1 over a year ago, so I can't really try it on anything s8) 8) s8)

I do know several local ppl with Mk1's though and I'm sure any one of them would be happy to get one s;) ;) s;)

MR2 Roadster Owners Club

The Workshop => Performance Related => Topic started by: Anonymous on April 19, 2004, 12:27