Print Page - Another Investment!

Title: Another Investment!
Post by: Jap GT300 on April 22, 2004, 13:36

s:roll: :roll: s:roll: I don't mean to self promote, just to show some of the rare examples that I have been picking up.

(http://203.223.68.44/img/0117421007/0001.jpg)

(http://203.223.68.44/img/0117421007/0002.jpg)

Yet again this one also has changed the Spark plugs. I really want to find out what the advantages of this would be and where you would buy them, so if you find out please let me know. I think this is the fourth one I've seen.

(http://203.223.68.44/img/0117421007/0012.jpg)

Thanks Adam

Title:
Post by: SteveJ on April 22, 2004, 13:39

As I commented before, the most likely thing that they have done is put longer nose plugs in that would increase the compression ratio. These plugs probably have longer stems which prevent the coils going in their normal positions - hence the re-location of the coils and use of plug leads.

Title:
Post by: heathstimpson on April 22, 2004, 16:20

There does not look to be too much damage on that 2; very nice s:lol: :lol: s:lol:

Title:
Post by: Peter Laborne on April 22, 2004, 16:34

So that's what happens when you have sex on the bonnet!!!

Title:
Post by: Anonymous on April 22, 2004, 16:37

Judging by the buttock marks on the bonnet, she was a big girl... s:shock: :shock: s:shock:

Title:
Post by: heathstimpson on April 22, 2004, 16:46

Quote from: "Sentinel"Judging by the buttock marks on the bonnet, she was a big girl... s:shock: :shock: s:shock:

What in Japan; must have been a Sumo wrestler s:lol: :lol: s:lol: s:lol: :lol: s:lol:

Title:
Post by: Hope4Sun on April 22, 2004, 16:47

You get those sort of dents from having sex standing up on a bonnet. DOAH! s:oops: :oops: s:oops: don't know ho wi know that s:wink: :wink: s:wink:

Andy

Title:
Post by: Peter Laborne on April 22, 2004, 16:51

Seriously though, there are two holes, spaced equally, in the middle of the bonnet. From this the distortion is quite a regular and even pattern. Could the onwer have placed a front wing on the bonnet, which had too much downforce, hence it buckled the bonnet.

Title:
Post by: heathstimpson on April 22, 2004, 16:53

Quote from: "Peter Laborne"Seriously though, there are two holes, spaced equally, in the middle of the bonnet. From this the distortion is quite a regular and even pattern. Could the onwer have placed a front wing on the bonnet, which had too much downforce, hence it buckled the bonnet.

Never seen one with a front wing on it before s:? :? s:?

Title:
Post by: Peter Laborne on April 22, 2004, 16:56

There was one for the MkII MR2. A double element front wing with sideplates IIRC.

Title: Re: Another Investment!
Post by: Anonymous on April 22, 2004, 17:13

Quote from: "Jap GT300":roll: I don't mean to self promote, .....

Thanks Adam

So you will donate some of the profits to the club when its sold? s:wink: :wink: s:wink:

Title:
Post by: Jap GT300 on April 22, 2004, 17:45

I believe the damage was caused by sliding under the back of a truck. It does have some underneath damage and drivers side front as well.

MR2 Roadster Owners Club

The Workshop => General => Topic started by: Jap GT300 on April 22, 2004, 13:36