Print Page - swapping back lights pre with current.(SOLVED)

Title: swapping back lights pre with current.(SOLVED)
Post by: redarrow on March 14, 2012, 18:37

Hi there all.

I want to get the new looking back lights and add to a 2001 mr2, I want to no if it a easy job, or any medication to do cheers.

regards redarrow.

Title: Re: swapping back lights pre with current.
Post by: Chris H on March 14, 2012, 19:01

When you buy the face-lift lights,try and get them with the wiring harnesses and
its a simple plug and play.. s:) :) s:) ..if you dont get the harnesses,you can use your current
one's,but would need to trim the indicator part to allow for the old indicator bulb
to fit.......better if you get the lights with the harnesses.....hope this helps... s:roll: :roll: s:roll:

Title: Re: swapping back lights pre with current.
Post by: redarrow on March 14, 2012, 19:27

ty.

SOLVED

MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: redarrow on March 14, 2012, 18:37