MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: Anonymous on May 5, 2004, 08:02

Title: PART NUMBER
Post by: Anonymous on May 5, 2004, 08:02
anyone know the part number for the little plastic cover that releases the roof (under the deflector)?  It's the bit that says 'pull'!!  I just got two screws showing and want to tidy it up!

Thanks,

Viggs
Title:
Post by: Slacey on May 5, 2004, 08:05
One of the guys with the BGB will know... and I expect quite a few people will be interested in this one!  s:wink: :wink: s:wink:
Title: Re: PART NUMBER
Post by: Tem on May 5, 2004, 08:20
Quote from: "Viggs"anyone know the part number for the little plastic cover that releases the roof (under the deflector)?  It's the bit that says 'pull'!!  I just got two screws showing and want to tidy it up!

Remove your seats, I bet it's under there  s8) 8) s8)

It has a habit of flying off when you slam the top down. Put some two sided foam tape under it to keep it there  s;) ;) s;)
Title:
Post by: crankshaft on May 5, 2004, 14:19
So that's what it's for   s:oops: :oops: s:oops:  

I found it in the glovebox and always wondered what it was !

Crankshaft
Title:
Post by: Anonymous on May 5, 2004, 14:44
No sign of it anywhere!!

  s:( :( s:(
Title:
Post by: noddynurdle on May 5, 2004, 19:37
and i thought mine was the only one to fall off
thinking might get some of those sticky pads to hold it in better
Title: Re: PART NUMBER
Post by: Tem on May 5, 2004, 19:50
Quote from: "Viggs"anyone know the part number for the little plastic cover that releases the roof (under the deflector)?  It's the bit that says 'pull'!!  I just got two screws showing and want to tidy it up!

Seems you can't get just the plastic cover from Toyota, but you have to buy the whole latch. Part number 65904-17011...and apparently that's about $80 in US, pretty expensive, if you only need the plastic cover  s:? :? s:?