How i fitted corky breastplate.
the 6 bolts needed are there from
The stock plate and stock bar.
Jack car up both ends straight.
Release the three plastic grommets with pliers.
Release the 4 bolts 12mm socket of the plate , now put that plate aside
Know release the bar on the other end two bolts 12mm , put that aside
Position the new breastplate where the plastic grommets are ,
Push the breastplate into the plastic grommets.
Know screw all the nuts in position then
Do all the nuts up randomly, until the
Breast plate is touching the car floor tightly.
Make sure it all straight.
Take car off stands enjoy your ride.
Hope it helps someone in the future.