Print Page - Mesh for engine bay

Title: Mesh for engine bay
Post by: Anonymous on July 30, 2004, 18:49

I bought some mesh stuff at JAE after seeing how nice it looks on the underside of the engine-bay lid (still not sure if it's a bootlid or a bonnet)

I've had a good play with the search button and found Kris' template - before I attack this tomorrow I have 2 questions...

1) Is there any difference to to the shape of mine as it's an 03?

2) Apart from wearing 6 pairs of thick gloves and taking my time - any words from the wise that will help me transform my 2 to a beast of even more beauty without totally cocking it up or breaking anything?

much obligio

Title:
Post by: Anonymous on July 30, 2004, 19:16

Mine is an 03, but no... there is no difference.

Tip... dont cut too much off... its easier to remove extra than it is if you cut too much off! s:wink: :wink: s:wink:

Also remember that if your mesh is a different pattern one way round or up, that you cut it so it matches the other side of it will look strange.

Title: Re: Mesh for engine bay
Post by: Peter Wright on July 30, 2004, 20:13

Quote from: "swp"2) Apart from wearing 6 pairs of thick gloves and taking my time - any words from the wise that will help me transform my 2 to a beast of even more beauty without totally cocking it up or breaking anything?

much obligio

Carefull what you cut it with
After experimenting I found that household sissors were the best
Just do a bit at a time and refit and you should not go wrong

LOL
Pete

Title:
Post by: Liz on July 30, 2004, 21:37

Hi Sandi,

Changed my aluminium for a stainless steel mesh and my helpful neighbour saw me struggling to cut it and helped me out to cut it, I did fit it in myself!! Oh, and don't scratch your face with it, I have a lovely line across my chin at the moment! post us some pictures when you have done. s:) :) s:)

Title:
Post by: Anonymous on August 2, 2004, 22:56

How about this for a picture?

(http://www.pelicanracing.com/pics/ssg.deck.8.JPG)

-Hong

Title:
Post by: heathstimpson on August 3, 2004, 06:41

You have left the drip tray off by the look of it and where do you get the Chrome Spyder decal thats on your brake light from please mate s:?: :?: s:?:

Title:
Post by: GSB on August 3, 2004, 06:59

Quote from: "heathstimpson"You have left the drip tray off by the look of it and where do you get the Chrome Spyder decal thats on your brake light from please mate s:?: :?: s:?:

Thats the US market badge that they get in place of our " Roadster" Badge. I've had one on my car for a couple of years, tat I got from an SC member, but I'm sure you can get your local Mr T to order one for you. The part number is on SC if you go searching.

Title:
Post by: Anonymous on August 3, 2004, 18:54

thanks for your help so far lads & lasses' - but I haven't done it yet.... soon..... s:roll: :roll: s:roll:

MR2 Roadster Owners Club

The Workshop => General => Topic started by: Anonymous on July 30, 2004, 18:49