Guys,
anyone have a stereo surround knocking about to fit a double din unit in?
I have one but its a PFL one (indentations in each side to match the installed stereo) and it doesnt go over the front on my double din stereo, I think I need a FL surround (flat) and the "spaces" (which I already have)
mine is the one in this post:
l viewtopic.php?f=31&t=51863#p600593 (http://www.mr2roc.org/phpBB3/viewtopic.php?f=31&t=51863#p600593) l
But I need the one in this post:
l viewtopic.php?f=31&t=51863#p600616 (http://www.mr2roc.org/phpBB3/viewtopic.php?f=31&t=51863#p600616) l
Best put up a wanted add
In the WANTED section.
You just need to remove a few millimetres off the top edge
i used the edge of a stanley knife , just fitted this double din radio a few days ago in my face lift car using a PFL surround
(https://farm8.staticflickr.com/7608/16820857246_4722be6cc1.jpg) (https://flic.kr/p/rCphQ7)DSCN0621 (https://flic.kr/p/rCphQ7) by Mulaz1 (https://www.flickr.com/people/67657181@N06/), on Flickr