Print Page - PFL fog lights

Title: PFL fog lights
Post by: Kimitech on June 21, 2015, 15:48

Hello, Just a quick one.
How can I wire up to the pfl car the front fog lights (using front fl bumper and fogs).
What all I need to do it and are there any guides how to?

Thanks
Kamil

Title: Re: PFL fog lights
Post by: cabbydave on June 21, 2015, 17:04

No guides but if you take the front bumper off then look at the wiring near the horn you will see a single red wire with a connector on the end this is the live to the fogs the earth lead gets bolted to the chassis. There is a space in the fuse box on the side of the dash for the fog light fuse pop one in. Then take the trim off at the bottom of the a post on yhe right hand side on uk cars and you will see a connector with 3 wires coming from it one red the same as the front wire one I think is green that comes from the light switch and another wire that is a live. You will have to get a connector to fit this and some wires to go straight to a relay then you need a switch one side goes to earth and the other side of the switch goes to the relay.

Title: Re: PFL fog lights
Post by: Kimitech on June 21, 2015, 18:11

Thanks. What do you mean by a post? Is it the door sill cover?

Title: Re: PFL fog lights
Post by: cabbydave on June 21, 2015, 18:42

The little bit in front of that. The a post is where the hinges bolt to

Title: Re: PFL fog lights
Post by: Kimitech on June 21, 2015, 21:02

Maybe a picture would help.

Title: Re: PFL fog lights
Post by: cabbydave on June 21, 2015, 22:09

Maybe you want me to take my car apart for you

Title: Re: PFL fog lights
Post by: Kimitech on June 22, 2015, 07:29

Sorry, I did not mean it in this way. Probably know which part are you talking about. Thanks

Title: Re: PFL fog lights
Post by: cabbydave on June 22, 2015, 08:23

If I get time tonight I will take some for you and others

MR2 Roadster Owners Club

The Workshop => Audio / Security / Electrical => Topic started by: Kimitech on June 21, 2015, 15:48