Text only | Text with Images

MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: Kimitech on July 9, 2015, 15:51

Title: Rear camber
Post by: Kimitech on July 9, 2015, 15:51
Hello,

After wheel geometry I find out that all I need is to allow my left rear wheel a bit more camber.
Has anybody done this by reboring the holes on the strut and using the same bolts?
This should do it so I´m asking if somebody has an experience with it.

Thanks
Title: Re: Rear eccentric bolts
Post by: Kimitech on July 9, 2015, 19:18
Sorry, double post.
Text only | Text with Images