My electric aerial no longer goes up and down and I want to replace it with a Bee Sting Stubby one.
There are plenty on ebay but its just the aerial bit that screws in which is no good as I need the whole thing incuding the bit that the aerial screws into!
Anyone know how I can fit a Beesting/Stubby aerial on the rear wing without having to go to Toyota?
I've read that the S2000 one fits, but most aftermarket ones are for display as they don't receive a good signal
There should be some results if you search...
Now fixed as per how to section
How long did it take you to fix and was it particularly hard?
No easy the longest part was taking off the wheel liner.
The fix was easy but it has made it about 6" shorter which I prefer.
complete S2000 Aerials do not fit!! without major work.... i have one on mine and it took two days of head scratching s:flame: :flame: s:flame:
(https://farm8.staticflickr.com/7651/16762516681_b90f517796_k.jpg) (https://flic.kr/p/rxfhdi)DSCN0586 (https://flic.kr/p/rxfhdi) by Mulaz1 (https://www.flickr.com/photos/67657181@N06/), on Flickr
had to do mods to the Aerial electronics pre amp and my rear car wing so the unit would fit!!!
i can now say 100% do not think about trying to fit one
Looks good though.
Works brill as it has a pre amp and the best bit is no more clatter from the electric aerial each time i start up.
but would i do it again NO!