Print Page - Correct driver for soft top bracket screws

Title: Correct driver for soft top bracket screws
Post by: insx on September 10, 2015, 18:33

Hi Folks

Can anyone tell me what the correct size torx driver is for the soft top brackets above the windsreen? I need to remove the trim but T40 is the biggest I have and that is just chewing up the screws. They seem to be really tight in there but they are also quite soft metal s:( :( s:(

Title: Re: Correct driver for soft top bracket screws
Post by: Topdownman on September 10, 2015, 20:38

Good luck with that!

Have a look at this thread...

l viewtopic.php?f=11&t=55302 (http://www.mr2roc.org/phpBB3/viewtopic.php?f=11&t=55302) l

They are a nightmare.

Title: Re: Correct driver for soft top bracket screws
Post by: insx on September 10, 2015, 23:02

Oh dear! I would abort mission if I could but I pulled the trim off and I don't think it's going back in unless I get those screws out.

MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: insx on September 10, 2015, 18:33