MR2 Roadster Owners Club

The Workshop => Performance Related => Topic started by: JoeCool on October 22, 2015, 09:51

Title: Cheap Parts Supplier: People have got cheap shifter shafts..
Post by: JoeCool on October 22, 2015, 09:51
Dear all:

There was a site posted in one of the 2zz/ 6 speed swap threads with people getting cheap Toyota parts from an overseas supplier with a website that looked very scammy, but apparently delivered cheap parts.... Can anyone link me to it?? I need to find some cheaper bits!
Title: Re: Cheap Parts Supplier: People have got cheap shifter shaf
Post by: J03 on October 22, 2015, 12:55
 m https://www.amayama.com/en/search/ (https://www.amayama.com/en/search/) m
Title: Re: Cheap Parts Supplier: People have got cheap shifter shaf
Post by: JoeCool on October 22, 2015, 13:01
Thanks!!

Couldn't find it for the life of me, I was reading through all the old threads.
Title: Re: Cheap Parts Supplier: People have got cheap shifter shaf
Post by: 1979scotte on October 23, 2015, 00:35
They're doing rear crossmember for 219 if delivery is less than 100 it's cheaper than main dealer isn't it now cams kill have stopped doing them.
Title: Re: Cheap Parts Supplier: People have got cheap shifter shaf
Post by: J03 on October 23, 2015, 08:36
I contacted them about the rear subframe & they can't supply it. Not everything they list is available, you have to submit a request & then see what they come back with. I had same problem with the abs actuator bracket being discontinued.
Title: Re: Cheap Parts Supplier: People have got cheap shifter shaf
Post by: 1979scotte on October 23, 2015, 12:48
Pants!
Will just have to bite the bullet and go to Mr T.
Unless anybody knows another route.
Title: Re: Cheap Parts Supplier: People have got cheap shifter shaf
Post by: J03 on October 23, 2015, 13:11
I've just sent pics off to a local fabrication company to see if they can put together an alternative frame style design. That might not be to everyone's taste, but I'll post an update if I hear anything back.
Title: Re: Cheap Parts Supplier: People have got cheap shifter shaf
Post by: cyclehead on November 3, 2015, 20:39
Out of curiosity, I sent a note to DD Performance Research in Texas.  They have just started production on a replacement crossmember that should also provide sufficient clearance for 2GR swaps.    I'm not sure what it looks like.  I'm guessing welded tubes?