Print Page - Turbo manifold flange adopters?

Title: Turbo manifold flange adopters?
Post by: kostonhumar on April 13, 2016, 22:00

Have been given a vf18 turbo and have now run into the problem of manifolds to fit it, without costing the earth... Is there any such thing as a flange adapted? And if so could some one point me in the right direction... As I have exhausted my fingers looking.. Cheers

Title: Re: Turbo manifold flange adopters?
Post by: Mark A on April 13, 2016, 22:08

Yes search eB@y and you should find one, from memory I think it's described as a Mazda one,T25 to Subaru mount.

Title: Re: Turbo manifold flange adopters?
Post by: Mark A on April 13, 2016, 22:10

Try 231631479268 is this what you mean?

Title: Re: Turbo manifold flange adopters?
Post by: kostonhumar on April 13, 2016, 22:11

I knew you guys would come through s:) :) s:)

Title: Re: Turbo manifold flange adopters?
Post by: kostonhumar on April 14, 2016, 09:51

(http://uploads.tapatalk-cdn.com/20160414/032e54379ae5e158b6dc7eaa3986bbd9.jpg)

So this it the turbo... I was looking at the adapter and not sure it's right....

Sent from my iPhone using Tapatalk

Title: Re: Turbo manifold flange adopters?
Post by: keljon on April 14, 2016, 14:27

you can buy manifolds with the vf series flange on them, cant find an ebay listing for just the manifold but here is one for manifold and turbo 221275356922

Title: Re: Turbo manifold flange adopters?
Post by: mr-ed_smt on April 14, 2016, 16:12

Would this adaptor fit? m https://www.ebay.co.uk/ulk/itm/231631479268 (https://www.ebay.co.uk/ulk/itm/231631479268) m

Title: Re: Turbo manifold flange adopters?
Post by: kostonhumar on May 7, 2016, 17:34

Afraid not in the end I just loped off the flange and put on another s:) :) s:)

Thanks for your suggestions

Sent from my iPhone using Tapatalk

MR2 Roadster Owners Club

The Workshop => Performance Related => Topic started by: kostonhumar on April 13, 2016, 22:00