Print Page - Aerial mod correct wire to cut on facelift 58806 head unit

Title: Aerial mod correct wire to cut on facelift 58806 head unit
Post by: swandez on April 21, 2016, 20:20

As above I have the switch and wiring ready to go just need to establish the correct colour cable to cut, I have a 2003 facelift car with the 58806 head unit...

Thanks

Title: Re: Aerial mod correct wire to cut on facelift 58806 head un
Post by: gazza1286 on April 21, 2016, 20:44

It's the black wire.

See:-

l viewtopic.php?f=31&t=32754 (http://www.mr2roc.org/phpBB3/viewtopic.php?f=31&t=32754) l

The wire runs along the driver's sill under the threshold capping. That's where I cut mine as access was easier and directly below the dash where I installed my switch.

Title: Re: Aerial mod correct wire to cut on facelift 58806 head un
Post by: swandez on April 21, 2016, 21:15

Awesome thanks a lot!

Title: Re: Aerial mod correct wire to cut on facelift 58806 head un
Post by: swandez on April 29, 2016, 00:07

Mod done wired up window lock switch and after a bit of a faff all done and no big gay aerial when I play CD's happy f***ing days!

MR2 Roadster Owners Club

The Workshop => Audio / Security / Electrical => Topic started by: swandez on April 21, 2016, 20:20