MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: Garfy on March 31, 2017, 08:04

Title: Boot lid
Post by: Garfy on March 31, 2017, 08:04
Good morning folk, anyone know another way of opening the boot ? My lever doesn't seem to work   s:( :( s:(  
Turned up at work this morning and have water running out of radiator   s:oops: :oops: s:oops:  
I got 15 miles to get it home/garage if I take it easy would the engine be ok?

  s:bounce: :bounce: s:bounce:
Title: Re: Boot lid
Post by: brettfield999 on March 31, 2017, 09:23
Ud probably need to get under the front of the car and press the release.  Is it overheating?
Title: Re: Boot lid
Post by: Garfy on March 31, 2017, 09:49
Strange it didn't show as running hot :-/
Erred on the cautious side, booked into a garage and green flag recovering once I've finished work.
Bugger, got to out the kia back on the road
Title: Re: Boot lid
Post by: brettfield999 on March 31, 2017, 09:53
Is there a colour to the fluid and is your car an AC model.  Could it be leaking from the condenser?
Also check the rad bottle in the engine bay (left side)
Title: Re: Boot lid
Post by: Garfy on March 31, 2017, 12:58
Couldn't see any colour to the fluid, cant get to see the rad bottle as can't get the boot open.  :-) :-) :-)
No A/C
Not nice to see my car on the back of a low loader  s:-( :-( s:-(
Title: Re: Boot lid
Post by: brettfield999 on March 31, 2017, 12:59
Do you mean the front or rear "boot". I meant check the expansion tank in the back, my mistake
Title: Re: Boot lid
Post by: onion86 on March 31, 2017, 14:17
If you mean the engine lid (at the rear - opened via lever next to driver seat) as apposed to the frunk (at the front - opened via lever in glove box) I certainly don't have a boot  s:) :) s:)   then try following this: http://www.mr2roc.org/phpBB3/viewtopic.php?f=11&t=44534&p=521738#p521741. You will need a 2nd person to open it after you pull the lever the first time (or jam something to keep the lever up), then just twist the two rubber stoppers anti-clockwise.
Title: Re: Boot lid
Post by: Garfy on March 31, 2017, 16:26
Thanks for the info, I always thought as the engine in the boot  :-) :-) :-) .
I'm on the  spiss piss spiss  in Derby now.
Car is in the garage in Hertfordshire, put my kia back on the road  s:-( :-( s:-(
Title: Re: Boot lid
Post by: onion86 on March 31, 2017, 17:13
No problem. Hope it gets sorted in the garage. It's a boot on most cars, as long as you remember not to put your shopping in there you can think of it as whatever you like  s:D :D s:D
Title: Re: Boot lid
Post by: ianfcliffen on May 1, 2017, 09:11
If you have a look through the plastic mesh trim you can see the cable, bend a coat hanger, slip through and pull. Worked for me. Then adjust the stop next to the catch to retension.

Sent from my SM-T550 using Tapatalk