Print Page - Maf sensor position

Title: Maf sensor position
Post by: andyb on July 7, 2017, 01:17

I want to alter the position of my cone filter so it sits behind the battery (closer to the side vent). Does the distance from the maf sensor to the throttle body make any difference?

Title: Re: Maf sensor position
Post by: alancsalt on July 7, 2017, 19:04

Lot of ppl have done this. My MAF is just before the filter, which is next to vent behind battery. No problems.

Title: Re: Maf sensor position
Post by: shnazzle on July 7, 2017, 20:07

As long as there's no sharp bends before the maf,within 20cm or so, you're all good.

Sent from my ONEPLUS A5000 using Tapatalk

Title: Re: Maf sensor position
Post by: andyb on July 7, 2017, 21:15

Thanks for the replies.

MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: andyb on July 7, 2017, 01:17