I am looking for a new exhaust gasket but as it is a custom made system I am not sure where I can get a suitable replacement from.
It is a diamond shaped one as in the pics below (rough dimensions shown). A quick word with the local garage and they do everything based on ordering the part by reg. no which is no use for me!
Anyone got any suggestions please?
(http://i.imgur.com/P92i60p.jpg)
(http://i.imgur.com/iDFCYc5.jpg)
Take a trip an independant tyre and exhaust place, they'll most likely be able to find something
I have no idea where you can get a pre made one from, but if your stuck you can buy the gasket in sheet form and make it yourself. About £6 for small sheet on e bay
Thanks for the suggestions.
I will look into both ideas.
Quote from: "wotugonado"I have no idea where you can get a pre made one from, but if your stuck you can buy the gasket in sheet form and make it yourself. About £6 for small sheet on e bay
Shout if you need some of this. I have a bit you can have to make a gasket
PM me your addy and I'll get it in the post
Quote from: "Essex2Visuvesi"Quote from: "wotugonado"I have no idea where you can get a pre made one from, but if your stuck you can buy the gasket in sheet form and make it yourself. About £6 for small sheet on e bay
Shout if you need some of this. I have a bit you can have to make a gasket
PM me your addy and I'll get it in the post
Thanks for the offer, thats very kind of you but I have ordered one off ebay for an MG180 V6 which appears to have the right dimensions so fingers crossed it will work!
no problem
Got A few sheets of this stuff so happy to cut you a bit and wack in the post