hi
so since the car has 15 years old, I wen to take a look at the tank, remove water and check filer.
for my surprise I found nothing at all
here are some pics :
fuel pump filter has no/little dirt
[attachment=1:112d9lm8] ia1 20171121_181226_s.jpg ia1 [/attachment:112d9lm8]
fuel tank has nothing that I can see
[attachment=0:112d9lm8] ia0 20171121_181556_s.jpg ia0 [/attachment:112d9lm8]
however, I can't see the "vapor pressure sensor conector"
[attachment=2:112d9lm8] ia2 20171121_161758_s.jpg ia2 [/attachment:112d9lm8]
was it removed from certain models ?
Very interesting to see the condition of this.
Vapour pressure sensor was only fitted to US cars to comply with California emissions
Quote from: "lamcote"Very interesting to see the condition of this.
I have seen Dad diaries MR2 (https://www.youtube.com/user/DualBoot101) repair videos and I can say that I have no rust anywhere.
Quote from: "SteveJ"Vapour pressure sensor was only fitted to US cars to comply with California emissions
thanks for the info, I will just add a note to my manual s:) :) s:)
I pulled the filter out of my 1997 BMW a couple of years ago, it had 180k miles on it and was the 2.8 so it had undoubtedly had some fuel run through it. It was as clean as a whilstle inside. I think what with petrol being a strong solvent, and UK petrol supplies being decent, it's basically a self cleaning system.
Quote from: "lamcote"Very interesting to see the condition of this.
Agreed. Thanks for sharing