I've just installed a TTE exhaust, but there isn't a RHS exhaust hangar on the car to connect to the RHS hangar on the exhaust.
Apparently these are available for TTE / Cobra installs and just bolt on next to the rear sway bar.
Any idea where I can find one of these brackets?
Rutland mr2.
If you can borrow one. Should nor be too difficult to duplicate. (Makle one up)
Says the bloke with no engineering skills whatsoever
Quote from: Ardent on October 9, 2018, 23:19
Rutland mr2.
If you can borrow one. Should nor be too difficult to duplicate. (Makle one up)
Says the bloke with no engineering skills whatsoever
I'll drop a message through to Dean @Rutland MR2 (https://www.mr2roc.org/forum/index.php?action=profile;u=24529) - if I can get FB messenger working in the office :)
Dean has confirmed: "always goes with the exhaust".... so I'm guessing my one wasn't sourced from them originally :(
There are various ones available on Fleabay, I know someone found some for someone else on Facebook but can't remember who? @Brizee67 might know.
Sent from my iPhone using Tapatalk
Take it its not still on Scotte's car?
Quote from: Call the midlife! on October 10, 2018, 12:42
There are various ones available on Fleabay, I know someone found some for someone else on Facebook but can't remember who? @Brizee67 might know.
Sent from my iPhone using Tapatalk
My exhaust came with the extra hanger which is very much home made (https://uploads.tapatalk-cdn.com/20181010/25452b5294f5d75c9fab216fd680f5cc.jpg)
Sent from my iPhone using Tapatalk
Quote from: Brizee67 on October 10, 2018, 13:39
Quote from: Call the midlife! on October 10, 2018, 12:42
There are various ones available on Fleabay, I know someone found some for someone else on Facebook but can't remember who? @Brizee67 might know.
Sent from my iPhone using Tapatalk
My exhaust came with the extra hanger which is very much home made (https://uploads.tapatalk-cdn.com/20181010/25452b5294f5d75c9fab216fd680f5cc.jpg)
Sent from my iPhone using Tapatalk
Aaah, I thought someone had recommended you a fleabay one when it was on Facebook, must've been you commenting on someone else's.
Sent from my iPhone using Tapatalk
thanks guys, keep the suggestions coming... looking at those photo's I might be able to get one of these and just use one half of it?
Quote from: BahnStormer on October 10, 2018, 15:00
thanks guys, keep the suggestions coming... looking at those photo's I might be able to get one of these and just use one half of it?
I looked at those on Halfrauds but I think It might hang too low?
Sent from my iPhone using Tapatalk
I was lucky. Mine came with the hanger from Dean. Best pic I can get of it
(http://i.imgur.com/i661EdL.jpg?1) (https://imgur.com/i661EdL)
I need one too, if someone wants to make some :)
When I had mine made at Powerflow they were literally going to charge me some "beer money" cash in hand
Sent from my ONEPLUS A5000 using Tapatalk
Just had one made by the guy building the the 200 cell cats for the group buy.
Probably worth checking out a local metal worker or exhaust builder in your area.
The hanger is quite important. There is always the chance that Rh pipe could drop.
I can ask Shane at STG but he is quite busy