Does anyone have a link or any recommendations for a set of BLACK standard fitment wheel nuts, preferably with locking nuts please?
All I can seem to find are "tuner" nuts with the taper.
Cheers!
Sent from my iPhone using Tapatalk
If all else fails you can get covers for them
https://www.demon-tweeks.com/uk/demon-tweeks-plastic-wheel-nut-bolt-cover-276812/
That's what I did on my previous 2 when I changed wheel colour, did away with the locking wheel nuts too
(https://uploads.tapatalk-cdn.com/20190218/8e7168f05d12a2ee6ab62ed796cca828.jpg)
Quote from: Bernie on February 18, 2019, 08:16
If all else fails you can get covers for them
https://www.demon-tweeks.com/uk/demon-tweeks-plastic-wheel-nut-bolt-cover-276812/
That's what I did on my previous 2 when I changed wheel colour, did away with the locking wheel nuts too
(https://uploads.tapatalk-cdn.com/20190218/8e7168f05d12a2ee6ab62ed796cca828.jpg)
Yeah, cheers Bernie, I've looked at those as a last resort but ideally I'd like to retain the locking nuts. I've not offered up the existing nuts and centre caps to the "new" wheels yet but I don't think they'll quite "go"..[emoji23]
Sent from my iPhone using Tapatalk
I've got some great black nuts, go perfectly with black wheels like team dynamics and have lasted years with no problem. The link for mine will be long gone but they are a set of 16 M12 x 1.5 nuts from EBAY.
Don't get ones with funky fitments - stick to normal length 19mm hex nuts.
Don't get alloy ones - they expand/contract and are more prone to loosen themselves.
Stick with ones like these:
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F142837130885
I cant help thinking you will struggle to find a flat faced wheel nut in black. Lots of choice in the taper ones but they would be dangerous to use on standard wheels.
I would spray the ends of each standard nut with etch primer then black rattle can. Then put them in your oven once it has been on to bake them. That would leave most of the contact surfaces unpainted to hopefully not get chipped but still give some of the look you are after?
Thanks all, definitely sticking with flat faced regardless and will have a think about the oven baking once I get the bloody thing back on the road [emoji23].
Sent from my iPhone using Tapatalk
Sorry assumed you were on aftermarket wheels! Ones I sent link for are obviously not ok for stock wheels, and I don't know of any that are.
Quote from: frogger on March 15, 2019, 14:50
Sorry assumed you were on aftermarket wheels! Ones I sent link for are obviously not ok for stock wheels, and I don't know of any that are.
No worries, the "standard fitment" bit is a little open to interpretation, normal alloys but had them coated and was after black to go better with the new colour.
But have since offered them up with the standard nuts and I might be able to live with it.
Sent from my iPhone using Tapatalk
These work?
https://www.ebay.co.uk/itm/282895820699
Jaguar XF wheel nuts, flat seat, M12x1.5
Quote from: m1tch on July 2, 2019, 13:04These work?
https://www.ebay.co.uk/itm/282895820699
Jaguar XF wheel nuts, flat seat, M12x1.5
Now there's a wonder... they're the correct fitment but I'll have to check seating length to be sure. Nice find David, cheers.
Quote from: Call the midlife! on July 3, 2019, 21:28Quote from: m1tch on July 2, 2019, 13:04These work?
https://www.ebay.co.uk/itm/282895820699
Jaguar XF wheel nuts, flat seat, M12x1.5
Now there's a wonder... they're the correct fitment but I'll have to check seating length to be sure. Nice find David, cheers.
Probably not the cheapest option, might be easier to simply get a set of chromed ones and repaint them black after removing/roughing up the surface, would probably look better than the covers and be cheaper than getting a set of black ones. I guess you could also spray over the chromed ones to get a 'shadow chrome' effect.
Quote from: m1tch on July 2, 2019, 13:04These work?
https://www.ebay.co.uk/itm/282895820699
Jaguar XF wheel nuts, flat seat, M12x1.5
Like that