Hi!
I've read this post in the german forum My-mr2.de. It's a company that makes chips and some interesting mods (it's more or less tranlated s:wink: :wink: s:wink: ):
(talking about a german piggyback)
"Toyota MR2 roadster 1,8 i all
original
modified
Capacity
1794 cm.
1794 cm.
Achievement
103 KW of 140 HP
with 6400 U/min.
115 KW of 156 HP
with 6450 U/min.
Torque
170 Nm
with 4400 U/min.
186 Nm
with 4450 U/min.
H?stgeschwindigkeit
210 km/h
215 km/h
Kraft?rtragung
5-Gang-Getriebe,
Rear propulsion
5-Gang-Getriebe,
Rear propulsion
Acceleration (0-100)
8,0 sec..
7,8 sec..
Price
599.00.
inclusive. Assembly and VAT, 5 years warranty on software and Steuerger?austeine
B&S engine and Chiptuning
Berlin Stra? 4
36166 Haunetal/Neukirchen
Tel: 06673 919430
Fax: 06673 919431
Mail: bs@motor chiptuning.de
part OF w www.motor (http://www.motor) w chiptuning.de
This side print
Window schlie?n
Very honoured gentleman...,
here you see a few data and prices f?Ihren MR 2,1,8 16V 103 KW.
- Chiptuning see you above in the data sheet (inclusive. Assembly + warranty)
- Sportz?kerzen 4polig, 2-3PS A 7,99 euro.
- sport air cleaner K+ N 33-2041, 2 HP of 57 euro.
- Decarbonfilterkit 3-4PS, 299 euro.
- Sportkat (Metalkat) 5-7 HP, A 359 euro.
- cam shafts umschleiffen 9-10 HP, 399 euro.
- treatment of cylinder heads Einla?+ Ausla?an? 10-12PS, 499 euro.
- Pr?tandmessung before + afterwards 40 euro.
- high-grade steel haven exhaust starting from Kat 3 HP, starting from 499 euro.
- request fax number, T?nur mailen by single acceptance m?ich.
And the question, what do you think of the achievements with the Sportcat, cam shafts and treatment of cylinder heads and whatever s:? :? s:? ?
Are these gains possible? And what about reliability? Is this is true you can gain 20hp for 900 euros!
Don't think so but, curious at least... s:D :D s:D
hey
i am from germany and a member in the my-mr2.de forum s;) ;) s;)
i`ll talk to the people at chiptuning......de and we`ll see s:D :D s:D
i don`t think that 20ps are posible but if someone with unichip gets 20ps why not with german chips!!!
please excuse my bad english!!
Hi Mito!
I think you have misunderstood me. I'm referring to the other mods, no doubts about good quality of german chips.
I mean, could you get 25 hp added to the 14-20 you get with the chip, doing the head work, cam shafts and changing the cat?
This wil made 40 hp??? s:shock: :shock: s:shock:
May be, but... s:D :D s:D
i have asked them.
they said with head work and cam shafts and chip you`ll get 30-34hp s;) ;) s;)
don`t know if it is right but they garantee it with dyno...
Hi!
Mito:
Could you ask them for the dynos. If they send you the dynos they have done in 1zz you could post them here and we all would see it, and this would be superb! s:wink: :wink: s:wink:
Thanks in advance!
Cheers,
Alberto