MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: Carolyn on January 4, 2020, 13:46

Title: All change for O rings
Post by: Carolyn on January 4, 2020, 13:46
For those of us that have bought O rings from 'Sealforce' on Ebay.

They seem to have disappeared.  However an new supplier has emerged.  I suspect it's a re-birth of Sealforce.

Stock is very similar but the shopping experience has changed.

it is now 'Sealssuppliesuk. 

Link to Ebay shop is: https://www.ebay.co.uk/str/sealsuppliesuk

If you do buy O rings, I reccommend you save this new one in your 'saved sellers' list.
Title: Re: All change for O rings
Post by: Bossworld on January 19, 2020, 10:05
Hi Carolyn

Would this be the correct up to date listing for the tensioner seal?  Suspect I'm leaking again and I can't remember which o-ring I used when I fitted a new Toyota tensioner.

https://www.ebay.co.uk/itm/Imperial-Viton-Rubber-O-Rings-3-53mm-Cross-Section-BS202-BS261-5-94-171-05mmID/143004596283?hash=item214bbcf83b:m:m1qrhBwYfFRdhxcxkW7VL1Q

Thank you
Title: Re: All change for O rings
Post by: Carolyn on January 19, 2020, 10:40
Quote from: Bossworld on January 19, 2020, 10:05Hi Carolyn

Would this be the correct up to date listing for the tensioner seal?  Suspect I'm leaking again and I can't remember which o-ring I used when I fitted a new Toyota tensioner.

https://www.ebay.co.uk/itm/Imperial-Viton-Rubber-O-Rings-3-53mm-Cross-Section-BS202-BS261-5-94-171-05mmID/143004596283?hash=item214bbcf83b:m:m1qrhBwYfFRdhxcxkW7VL1Q

Thank you
Yep.  21.82 mm ID.  Put a smear of oil on it and clean the inside of the housing with some 400 wet'n dry.
Title: Re: All change for O rings
Post by: Bossworld on January 19, 2020, 11:39
Quote from: Carolyn on January 19, 2020, 10:40
Quote from: Bossworld on January 19, 2020, 10:05Hi Carolyn

Would this be the correct up to date listing for the tensioner seal?  Suspect I'm leaking again and I can't remember which o-ring I used when I fitted a new Toyota tensioner.

https://www.ebay.co.uk/itm/Imperial-Viton-Rubber-O-Rings-3-53mm-Cross-Section-BS202-BS261-5-94-171-05mmID/143004596283?hash=item214bbcf83b:m:m1qrhBwYfFRdhxcxkW7VL1Q

Thank you
Yep.  21.82 mm ID.  Put a smear of oil on it and clean the inside of the housing with some 400 wet'n dry.

Thanks I'll grab a few for when others come looking