MR2 Roadster Owners Club

The Workshop => Performance Related => Topic started by: tets on April 20, 2020, 12:55

Title: RM Racing Electronics Wideband
Post by: tets on April 20, 2020, 12:55
Has anyone any experience with these? Searching for a wideband and this keeps popping up

https://lowcostracingsolutions.co.uk/wideband-kit/22-mega-afr-wideband-controller-and-display-lsu-49.html

Title: Re: RM Racing Electronics Wideband
Post by: Jay on April 21, 2020, 11:37
Haven't heard of them unfortunately.  I've used a few Innovate kits for testing various vehicles over the years and always had good experience with them.  Probably a bit more expensive but would recommend. Couple of cars I've worked on have used the AEM stuff which seem to get good feedback as well.
Title: Re: RM Racing Electronics Wideband
Post by: shnazzle on April 21, 2020, 12:17
It's probably fine as it comes with a good quality probe. As long as it is actually a Bosch LSU4.9.
They go for about 65 quid on a good deal retail, which puts that gauge at about 70 quid retail. Looking at it (no offense) that seems about right. 

It's no Innovate or AEM but it'll likely do. Depends how much you're going to rely on it
Title: Re: RM Racing Electronics Wideband
Post by: tets on April 21, 2020, 14:47
As much it does look at bit Chinese special, I can get my oil pressure and oil temp gauges very similar looking and I do want digital readout as well as the "analogue" bit. I can do the lot including a boost gauge for under £200 whereas if I buy all AEM it's not far off the cost of a set of coilovers!!

I want it to obviously keep an eye on things once it's been on the rollers