which one is best and better value for money, corky's is out of stock, not sure what the cost is going to be from the states, japanparts have them at £56 plus shipping, should i go for that or wait for corky's to come in stock....help please as i understand its a must have mod.....
I have got both, but first I would go for the Corky..nuisance if you have to wait for one though. I put the Cusco on after the corky so can't comment about what it would be like with just that on, but should imagine that you would feel the difference.
Sorry Liz, but I think you misunderstood what he is asking... I guess he was asking about corky's plate VS cusco's plate, the one in the next pic:
(http://www.japanparts.com/Pic/Pic010/112-011.JPG)
It's called "Floor Sub Frame" and can be bought from JapanParts (http://www.japanparts.com/shop/shop.cgi?mode=itemlist&maker=Toyota&type_car=MR%2dS+%3cMR2+Spyder%3e&type_second=Handling+and+Braking&type_third=Strut+Bars)
I've had no experience with Cusco's but if looks mean anything, I'd feel inclined to say Corky's plate is a bit more substantial.
Just my 2 cents.
yes thats it so, simple i was looking for a bit of a comparisson, thanks
Quote from: "Liz"I have got both, but first I would go for the Corky..nuisance if you have to wait for one though. I put the Cusco on after the corky so can't comment about what it would be like with just that on, but should imagine that you would feel the difference.
Does that mean you have both on at the same time? Did you notice a difference from just havng the Corky?
Quote from: "Bongo"Quote from: "Liz"I have got both, but first I would go for the Corky..nuisance if you have to wait for one though. I put the Cusco on after the corky so can't comment about what it would be like with just that on, but should imagine that you would feel the difference.
Does that mean you have both on at the same time? Did you notice a difference from just havng the Corky?
I guess it just means Liz has the same setup that I do. A corky's plate with a Cusco Front Strut Bar. s:) :) s:) You can confirm it in Liz's signature. s:wink: :wink: s:wink:
Ahh, and there was me having thoughts of a combined "super breast plate". s:oops: :oops: s:oops:
Sorry guys, read it quick, will go and do something girlie now like cook dinner! s:oops: :oops: s:oops:
Quote from: "Liz"Sorry guys, read it quick, will go and do something girlie now like cook dinner! s:oops: :oops: s:oops:
Hey! Are you calling me a girlie? s:D :D s:D I cook dinner very often s:D :D s:D
never tried them back to back, but I would expect Corkys tobe better.
it was designed to be.
Quote from: "so.simple"Hey! Are you calling me a girlie? s:D :D s:D I cook dinner very often s:D :D s:D
(http://webzoom.freewebs.com/umsegundo/so.simple_avatar.jpg) As if..have you looked in the mirror lately!!! s:wink: :wink: s:wink:
Now..back on topic!!
Sorry to drag up an old topic, but does anyone else have experience on this?
I was thinking of ordering one of these, as my location here in Greece would be easier:
m http://www.modacar.com/products/Toyota/MR2/SKIDPLATE/ (http://www.modacar.com/products/Toyota/MR2/SKIDPLATE/) m
Nathan
Quote from: "Agni"Sorry to drag up an old topic, but does anyone else have experience on this?
I was thinking of ordering one of these, as my location here in Greece would be easier:
m http://www.modacar.com/products/Toyota/MR2/SKIDPLATE/ (http://www.modacar.com/products/Toyota/MR2/SKIDPLATE/) m
Nathan
That's the original, which everyone copies s8) 8) s8) I don't think you'd notice a difference between any of these plates, so get the one you prefer.
I was looking at a photo of the original 'plate' on the site, and wondered how easy it would be to re-enforce the standard plate? I have a friend who runs a welding shop and I am sure if I took it off and he were to 'weld it up' it would be an improvement. Does anyone have any advice or experience on this?
Nathan
PS In the mean time, I have emailed 'Corky' to see if I can buy an original.
Have you seen the standard plate + bar? TBH, I reckon you could wedge a bit of cardboard in there and it'd do a better job.
Get the Corky/Cusco plate if you want to make a difference.
Here's a pic of the original two pieces versus antiflex plate.
(http://koti.mbnet.fi/temmeke/MR-S/braces/antiflex.jpg)
I do not understand. Sorry.
I assume:
The two on the right are the existing plate, which the Corky/Cusco replace, but the bar I have not seen before. The replacement on the left is from whom?
Quote from: "Agni"The two on the right are the existing plate, which the Corky/Cusco replace, but the bar I have not seen before.
Yes, the two on the right are the stock plates. The bar on the background isn't related to this s:? :? s:?
QuoteThe replacement on the left is from whom?
I don't even remember...it was a groupbuy in a site that doesn't exist anymore ( w www.mr2-spyder.com (http://www.mr2-spyder.com) w ), some years before Corky started to make these. But the plates are all similar anyway and connect to the same 6 places where the stock plates are.
Looks like an iMR2 anti-flex plate - there's an old fitting guide on m http://www.spydermagazine.com (http://www.spydermagazine.com) m . Don't think you can get them anymore.
Quote from: "jonytom"Looks like an iMR2 anti-flex plate
It's not. These were done after his 1st batch, when he said he wouldn't do these anymore, but later on he did anyway s8) 8) s8)
If you want a really cool alternative, look here http://www.lmcorse.com/master.htm
The design has changed a little from the pic on the site with a few more holes making it lighter. I have one of these and it's beautifully made. Nathan, the p&p might be better for you as you're close to Italy.
It cetainly makes a noticeable difference to my 2's handling.
I recieved mine only last week from Corky and I'm sure he is still processing. I ordered via a group buy on Spyderchat .com