Print Page - Trimming rear 'nappy' for TTE exhaust

Title: Trimming rear 'nappy' for TTE exhaust
Post by: barchetta_ms on September 13, 2020, 11:05

I've fitted a TTE exhaust and would like to re-fit the rear nappy - are there any guides on where to trim the plastic for this?

cheers

Title: Re: Trimming rear 'nappy' for TTE exhaust
Post by: Ardent on September 13, 2020, 11:36

I was under the impression you didn't need to trim the nappy.

Title: Re: Trimming rear 'nappy' for TTE exhaust
Post by: barchetta_ms on September 13, 2020, 11:40

I gave it a good go trying to fit it but it fouls the RH exhaust as it comes down from the box - I thought based on this post (https://www.mr2roc.org/forum/index.php?topic=66580.msg784457#msg784457) it would need trimming

Title: Re: Trimming rear 'nappy' for TTE exhaust
Post by: Ardent on September 13, 2020, 11:49

Every days a school day.
Someone will know for sure.

Mine was already fitted so never knew. And after it started to smoulder. It came off and stayed off.

Bit like the last post in the thread you linked to.

Title: Re: Trimming rear 'nappy' for TTE exhaust
Post by: Mikeymead on September 14, 2020, 16:52

Here is how I trimmed mine when I had a TTE. fit was quite good.

Nappy.jpg

Title: Re: Trimming rear 'nappy' for TTE exhaust
Post by: barchetta_ms on September 14, 2020, 17:35

Quote from: Mikeymead on September 14, 2020, 16:52Here is how I trimmed mine when I had a TTE. fit was quite good.

Nappy.jpg

Excellent - many thanks for that!

MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: barchetta_ms on September 13, 2020, 11:05